Difference between revisions of "CTRCARD Registers"
Jump to navigation
Jump to search
| Line 30: | Line 30: | ||
! BIT | ! BIT | ||
! DESCRIPTION | ! DESCRIPTION | ||
| + | |- | ||
| + | | 28 | ||
| + | | Reset (Read-only 1=High, 0=Low) | ||
| + | |- | ||
| + | | 29 | ||
| + | | Transfer mode (1=Write, 0=Read) | ||
|- | |- | ||
| 30 | | 30 | ||
| − | | Interrupt enable | + | | Interrupt enable (1=Enable, 0=Disable) |
|- | |- | ||
| 31 | | 31 | ||
Revision as of 23:30, 27 October 2012
Registers
| NAME | PHYSICAL ADDRESS | WIDTH |
|---|---|---|
| REG_CTRCARDCNT | 0x10004000 | 4 |
| REG_CTRCARDSECCNT | 0x10004008 | 4 |
| REG_CTRCARDSECSEED | 0x10004010 | 4 |
| REG_CTRCARDCMD | 0x10004020 | 16 |
| REG_CTRCARDFIFO | 0x10004030 | 4 |
REG_CTRCARDCNT
| BIT | DESCRIPTION |
|---|---|
| 28 | Reset (Read-only 1=High, 0=Low) |
| 29 | Transfer mode (1=Write, 0=Read) |
| 30 | Interrupt enable (1=Enable, 0=Disable) |
| 31 | Start (1=Busy, 0=Idle) |
REG_CTRCARDCMD
Specifies the 16-byte command to send. The command is split into 32-bit words, and stored as least significant word first, with each word itself in big-endian format.