Revision as of 21:19, 29 July 2014

Config services

Command Header	Available since system version	Description
0x00010082		GetConfigInfoBlk2
0x00020000		SecureInfoGetRegion
0x00030000		GenHashConsoleUnique
0x00040000		GetRegionCanadaUSA
0x00050000	5.0.0-11	GetSystemModel
0x00060000	6.0.0-11	GetModelNintendo2DS
0x00070040	7.0.0-13	(u8 val) This writes the input u8 to the first byte in the config-block for blkID 0x00160000.
0x00080080	7.0.0-13	(u32 value, u8 type) This goes through a table containing 5 entries, each entry is 2-words. Type0: compare entry-word0 with input value, on match write entry-word1 to cmdreply+8 output. Type1: compare entry-word1 with input value, on match write entry-word0 to output.
0x00090080	7.0.0-13	(u16 index, u16 value) This writes the specified value into the entry[inputindex], for the table with 0xBB entries listed below. The input index must be <0xBB.
0x000A0040	7.0.0-13	(u16 value) This goes through a table containing 0xBB entries. When an entry is found containing a 2-byte value matching the input 2-byte value, the u16 index is written to cmdreply+8. When no match was found, the output index is value 0xFF.

This only handles the commands listed under the above "Config services", no additional commands.

This is an interface for the "SPI::NOR" service, for accessing the Wifi NVRAM/SPI Flash.

@@ Line 94: / Line 94: @@
 = Config service "cfg:u" =
+This only handles the commands listed under the above "Config services", no additional commands.
 = Config NVRAM service "cfg:nor" =