Process Services PXI

Process Services PXI "pxi:ps9"

Command Header (Pre 2.0)	Command Header (Post 2.0)	Available since system version	Description
0x000100C6	0x000100C6	1.0.0-0	This crypts a raw message with RSA.
0x00020284	0x00020284	1.0.0-0	SignRsaSha256
0x00030284	0x00030284	1.0.0-0	VerifyRsaSha256
0x00040140	Removed	1.0.0-0, removed with 2.0.0-2	SetAesKey
0x000501C4	0x000401C4	1.0.0-0	EncryptDecryptAes
0x00060284	0x00050284	1.0.0-0	EncryptSignDecryptVerifyAesCcm
0x00070000	0x00060000	1.0.0-0	GetRomId. This reads 0x40-bytes from gamecard command 0xC6 (gamecard-uniqueID), and returns the first 0x10-bytes from that since the rest of the command reply is all 0xFF-bytes.
0x00080000	0x00070000	1.0.0-0	GetRomId2. The first u8 this returns is from GetRomMakerCode, the following 0x10-bytes are from encrypting the 0x10-bytes which GetRomId also returns. This is encrypted with AES-CBC, the regular normal-key and IV set by Process9 for this are loaded from the Process9 .rodata section.
0x00090000	0x00080000	1.0.0-0	GetCTRCardAutoStartupBit
0x000A0000	0x00090000	1.0.0-0	GetRomMakerCode
0x000B0000	0x000A0000	1.0.0-0	GetLocalFriendCodeSeed
0x000C0000	0x000B0000	1.0.0-0	GetDeviceId
0x000D0042	0x000C0042	1.0.0-0	SeedRNG
0x000E0042	0x000D0042	1.0.0-0	GenerateRandomBytes
0x04010084	0x04010084	8.1.0-0_New3DS	GenerateAmiiboHMAC. New_3DS-only. cmd[1] = insize, cmd[2] = outsize, cmd[3] = (insize<<8) | 0x4, cmd[4] = inbufptr, cmd[5] = (outsize<<8) | 0x14, and cmd[6] = outbufptr.
0x04020082	0x04020082	8.1.0-0_New3DS	GenerateAmiiboKeyData. New_3DS-only. cmd[1] = insize, cmd[2] = u8 flag, cmd[3] = (insize<<8) | 0x4, cmd[4] = inbufptr.
0x04030044	0x04030044	8.1.0-0_New3DS	AmiiboEncryptDecrypt. New_3DS-only.
0x04040044	0x04040044	8.1.0-0_New3DS	AmiiboEncryptDecryptDev. New_3DS-only.

These RSA commands are an interface for using the RSA engine. The system will hang when it attempts to use a >RSA-2048 RSA bit-size with the RSA engine, since the RSA engine does not support >RSA-2048. These RSA commands have an input field specifying what RSA bit-size to use, but the RSA padding code is hard-coded to use RSA-2048.

The New3DS 0x040X commands(used for Amiibo crypto) were removed with 9.3.0-21, the code for that was moved into NFC-module.

Command 0x04010084

The input buffer size must be <=0x1E0-bytes, and the out buffer size must be >0 and <=0x20-bytes. This calculates a SHA256-HMAC over the input buffer using the current already-generated Amiibo HMAC key(generated_amiibodata+0x20), the output hash is then written to the out buffer.

Command 0x04020082

This is used for Amiibo key generation. 0x30-bytes are generated. The input buffer size must be 0x40-bytes.

The input u8 must be either zero or non-zero, the used value varies depending on what crypto(AES/HMAC) operation is done after the crypto init.

Structure of the input buffer:

Offset	Size	Description
0x0	0x2	This is the raw Amiibo-write counter u16 from page[4] byte1.
0x2	0xE	All-zero.
0x10	0x8	This is the first 8-bytes of the NFC tag serial-number(page0-1).
0x18	0x8	Same 8-bytes as above.
0x20	0x20	This is the plaintext hash from NFC tag page[0x18], which is the hash listed under the page 0x15 section here.

Command 0x04030044

This is used for the actual Amiibo AES crypto, max input buffer size is same as command 0x04010084. AES-CTR is used here. Normal-key = generated_amiibodata+0x0, CTR = generated_amiibodata+0x10(see command 0x04010084 regarding generated_amiibodata).

Command 0x04040044

Similar to 0x04030044, except this is devunit-only with dev-only keys.

RSA Context

Offset	Size	Description
0x0	0x100	Modulo
0x100	0x100	Exponent
0x200	0x4	RSA bit-size.
0x204	0x1	0 = Public Exponent, 1 = Private Exponent
0x205	0x3	Padding

This context structure is fixed to 0x208-bytes.