3dbrew

MVD Services: Difference between revisions

← Older edit
No edit summary
2670QM (talk | contribs)
30 edits
 
(96 intermediate revisions by 3 users not shown)
Line 11: Line 11:
!  Available since system version  
!  Available since system version  
!  Description
!  Description
!  Used by [[Internet_Browser|SKATER]]
|-
|-
| 0x00010082
| 0x00010082
|  
| [[8.1.0-0_New3DS]]
| [[MVDSTD:Initialize|Initialize]]
| [[MVDSTD:Initialize|Initialize]]
| Yes
|-
|-
| 0x00020000
| 0x00020000
|  
| [[8.1.0-0_New3DS]]
| [[MVDSTD:Shutdown|Shutdown]]
| [[MVDSTD:Shutdown|Shutdown]]
| Yes
|-
|-
| 0x00030300
| 0x00030300
|  
| [[8.1.0-0_New3DS]]
| [[MVDSTD:CalculateWorkBufSize|CalculateWorkBufSize]]
| [[MVDSTD:CalculateWorkBufSize|CalculateWorkBufSize]]
| Yes
|-
| 0x000400C0
| [[8.1.0-0_New3DS]]
| [[MVDSTD:CalculateImageSize|CalculateImageSize]]
| No
|-
|-
| 0x00050100
| 0x00050100
|  
| [[8.1.0-0_New3DS]]
| (u8 unk0, u8 unk1, u8 unk2, u8 unk3) SKATER uses value 0 for all of these params.
| (s8 unk0, s8 unk1, s8 unk2, u32 unk3) SKATER uses hard-coded value 0 for all of these params. Using different input data for this doesn't seem to affect video-processing output.
| Yes
|-
| 0x00060000
| [[8.1.0-0_New3DS]]
| Unknown.
| No
|-
|-
| 0x00070000
| 0x00070000
|  
| [[8.1.0-0_New3DS]]
|  
| Used during shutdown with video-processing.
| Yes
|-
|-
| 0x00080142
| 0x00080142
|  
| [[8.1.0-0_New3DS]]
| [[MVDSTD:ProcessNALUnit|ProcessNALUnit]]
| [[MVDSTD:ProcessNALUnit|ProcessNALUnit]]
| Yes
|-
|-
| 0x00090042
| 0x00090042
|  
| [[8.1.0-0_New3DS]]
| (u8 unkval, val0, kprocess handle) This writes some state beginning at cmdreply[2]. unkval is normally 0, when preparing to shutdown MVD unkval is 1.
| [[MVDSTD:ControlFrameRendering|ControlFrameRendering]]
| Yes
|-
|-
| 0x000A0000
| 0x000A0000
|  
| [[8.1.0-0_New3DS]]
|  
| [[MVDSTD:GetStatus|GetStatus]]
| Yes
|-
| 0x000B0000
| [[8.1.0-0_New3DS]]
| GetStatusOther(unknown what this is used for). Same output size as [[MVDSTD:GetStatus|GetStatus]].
| No
|-
| 0x000C0100
| [[8.1.0-0_New3DS]]
| (u8 unk0, s8 unk1, u32 unk2, u32 unk3) Unknown.
| No
|-
| 0x000D0000
| [[8.1.0-0_New3DS]]
| Unknown.
| No
|-
| 0x000E0202
| [[8.1.0-0_New3DS]]
| Unknown. The code for this appears to be similar to [[MVDSTD:ProcessNALUnit|ProcessNALUnit]], this DMAs data from the input buffer as well.
| No
|-
| 0x000F0042
| [[8.1.0-0_New3DS]]
| (s8 unk, val0, handle) Unknown. Presumably the command 0x000E0202 version of [[MVDSTD:ControlFrameRendering]].
| No
|-
| 0x00100000
| [[8.1.0-0_New3DS]]
| Unknown. This writes 0x28-bytes of output starting at cmdreply[2].
| No
|-
| 0x00110000
| [[8.1.0-0_New3DS]]
| Unknown.
| No
|-
| 0x001200C0
| [[8.1.0-0_New3DS]]
| (s8 unk0, u32 unk1, u32 unk2) Unknown.
| No
|-
| 0x00130000
| [[8.1.0-0_New3DS]]
| Unknown.
| No
|-
| 0x001400C2
| [[8.1.0-0_New3DS]]
| Unknown. The code for this appears to be similar to [[MVDSTD:ProcessNALUnit|ProcessNALUnit]], this DMAs data from the input buffer as well.
| No
|-
| 0x00150042
| [[8.1.0-0_New3DS]]
| (s8 unk, val0, handle) Unknown. Presumably the command 0x001400C2 version of [[MVDSTD:ControlFrameRendering]].
| No
|-
| 0x00160000
| [[8.1.0-0_New3DS]]
| Unknown.
| No
|-
| 0x00170000
| [[8.1.0-0_New3DS]]
| Unknown.
| No
|-
|-
| 0x00180000
| 0x00180000
|  
| [[8.1.0-0_New3DS]]
|  
| Unknown. Used during initialization regardless of the operation mode(color-conversion/video-processing).
| Yes
|-
|-
| 0x00190000
| 0x00190000
|  
| [[8.1.0-0_New3DS]]
|  
| Unknown. Used during shutdown regardless of the operation mode(color-conversion/video-processing).
| Yes
|-
|-
| 0x001A0000
| 0x001A0000
|  
| [[8.1.0-0_New3DS]]
| Used when doing color-format conversion.
| Used when doing color-format conversion. This triggers writing to the output buffer specified via config.
| Yes
|-
|-
| 0x001B0040
| 0x001B0040
|  
| [[8.1.0-0_New3DS]]
| (u8 unknown) SKATER uses value 1 for this.
| (u8 inval) Used during video-processing initialization. SKATER uses hard-coded value 1 for this. MVD-sysmodule checks that the input value is not 0 or higher than 11. The input value must be one of the following: 1, 6, 9, or 10. Using any of these values instead of 1 results in no data being written to the output buffer with normal video processing, without any errors being thrown.
| Yes
|-
|-
| 0x001C0000
| 0x001C0000
|  
| [[8.1.0-0_New3DS]]
|  
| Used during shutdown with video-processing.
| Yes
|-
|-
| 0x001D0042
| 0x001D0042
|  
| [[8.1.0-0_New3DS]]
| [[MVDSTD:GetConfig|GetConfig]]
| [[MVDSTD:GetConfig|GetConfig]]
| Yes
|-
|-
| 0x001E0044
| 0x001E0044
|  
| [[8.1.0-0_New3DS]]
| [[MVDSTD:SetConfig|SetConfig]]
| [[MVDSTD:SetConfig|SetConfig]]
| Yes
|-
| 0x001F0902
| [[8.1.0-0_New3DS]]
| [[MVDSTD:SetupOutputBuffers|SetupOutputBuffers]]
| No
|-
| 0x00200002
| [[8.1.0-0_New3DS]]
| (val0, handle) Unknown. This loads data from the table entry which has a field matching a certain value. This is the global table used by [[MVDSTD:SetupOutputBuffers|SetupOutputBuffers]].
| No
|-
| 0x00210100
| [[8.1.0-0_New3DS]]
| [[MVDSTD:OverrideOutputBuffers|OverrideOutputBuffers]]
| No
|}
|}


This one uses the I/O mapped @ 0x10207000.
This one uses the I/O mapped @ 0x10207000.


This service is used by the [[New_3DS]] [[Internet Browser]].
This service is used by the [[New_3DS]] [[Internet Browser]]. SKATER runs the entire MVD initialization/shutdown each time the video player is entered/exited.


By default MVD does(?) various post-processing with the output image, this is controlled by the [[MVDSTD:GetConfig|configuration]]. This post-processing isn't done at all in certain cases. By default MVD will align the output frame width to 512, by writing zero-value pixels.
Linear-memory vaddrs passed to this service should be in the 0x30* region, MVD-sysmodule doesn't support the 0x14* region.
 
By default MVD does(?) various post-processing with the output image, this is controlled by the [[MVDSTD:GetConfig|configuration]]. This post-processing isn't done at all in certain cases.


Initialization procedures:
Initialization procedures:
* Color-conversion: Use command [[MVDSTD:Initialize]] with bufsize=1, then command 0x00180000.
* Color-conversion: Use command [[MVDSTD:Initialize]] with bufsize=1, then command 0x00180000.
* H.264: If needed, use [[MVDSTD:CalculateWorkBufSize]]. Then use [[MVDSTD:Initialize]]. Then use commands 0x00050100, 0x00180000, and 0x001B0040.
* H.264: If needed, use [[MVDSTD:CalculateWorkBufSize]]. Then use [[MVDSTD:Initialize]]. Then use commands 0x00050100, 0x00180000, and 0x001B0040. Then use [[MVDSTD:ProcessNALUnit]] for each of the individual NAL-unit parameter sets("Sequence Parameter Set" and "Picture Parameter Set"), with the main video processing starting afterwards.


Shutdown procedures:
Shutdown procedures:
* Color-conversion: just use command 0x00190000, then [[MVDSTD:Shutdown]].
* Color-conversion: just use command 0x00190000, then [[MVDSTD:Shutdown]].
* H.264: Use command 0x00090042 in a loop, waiting for it to return a retval that isn't 0x00017002. Then use commands 0x001C0000, 0x00190000, and 0x00070000. Then use [[MVDSTD:Shutdown]].
* H.264: Use command 0x00090042 in a loop, waiting for it to return a retval that isn't 0x00017002. Then use commands 0x001C0000, 0x00190000, and 0x00070000. Then use [[MVDSTD:Shutdown]].
===MVDSTD configuration structure===
{| class="wikitable" border="1"
|-
!  Offset
!  Size
!  Description
|-
| 0x0
| 0x4
| Input format type, see below.
|-
| 0x4
| 0x4
| The default for this is 0x0. Must be <=5. When non-zero, the type value at offset 0x0 must be one of the following: 0x00020001, 0x00010001, 0x00010005, 0x00010006, or 0x00010007. Doesn't seem to have any visible affect on the output for video processing.
|-
| 0x8
| 0x4
| The default for this is 0x0. This must be <=1. Referred to as "H264 range" in SKATER. When 0x1 the output image is brighter than normal.
|-
| 0x0C
| 0x4
| Input video width. Must be >=width_min and <width_max. This must be aligned: the low <dimensions_alignment>-bits must be clear.
|-
|-
| 0x10
| 0x4
| Input video height. Must be >=height_min and <height_max. This must be aligned: the low <dimensions_alignment>-bits must be clear.
|-
| 0x14
| 0x4
| Input data physical address, only set for color-conversion. This isn't used when the value at offset 0x4 is 0x1 or 0x5.
|-
| 0x18
| 0x4
| Physical data address, only used for color-conversion when the type value has bitmask 0x20000 set. This isn't used when the value at offset 0x4 is 0x1 or 0x5.
|-
| 0x1C
| 0x4
| Physical data address, only used for color-conversion when the type value is 0x20000. This isn't used when the value at offset 0x4 is 0x1 or 0x5.
|-
| 0x20
| 0x4
| Physical data address, for color-conversion. This isn't used when the value at offset 0x4 is 0x0 or 0x4.
|-
| 0x24
| 0x4
| Physical data address, only used for color-conversion when the type value has bitmask 0x20000 set. This isn't used when the value at offset 0x4 is 0x0 or 0x4.
|-
| 0x28
| 0x4
| Unknown. Doesn't seem to have any visible affect on the output.
|-
| 0x2C
| 0x4
| When non-zero this enables some sort of color adjustment for the output?
|-
| 0x30
| 0x4
| Same affect as offset 0x2C? This must not be enabled at the same time as that field.
|-
| 0x34
| 0x4
| Unknown, must be <8 for video-processing? Doesn't seem to have any visible affect on the output.
|-
| 0x38
| 0x4
| Unknown. Doesn't seem to have any visible affect on the output.
|-
| 0x3C
| 0x4
| Unknown, must be <8 for video-processing? Doesn't seem to have any visible affect on the output.
|-
| 0x40
| 0x4
| When non-zero this enables usage of the 4 words starting at offset 0x44. SKATER sets this to 0x0 for color-conversion, and 0x1 for video processing(this flag isn't mandatory for the latter).
|-
| 0x44
| 0x4
| See offset 0x40. The default for this is 0x0. u32 input_crop_x_pos. Must be <=widthval. Where widthval = <width value from the field at offset 0xC>. The low 4-bits of this value must be clear.
|-
| 0x48
| 0x4
| See offset 0x40. The default for this is 0x0. u32 input_crop_y_pos. Must be <=heightval. Where heightval = <height value from the field at offset 0x10>. The low 4-bits of this value must be clear.
|-
| 0x4C
| 0x4
| See offset 0x40. u32 input_crop_height. Must be >=16 and <=heightval. Where heightval = <height value from the field at offset 0x10>. The low 3-bits of this value must be clear.
|-
| 0x50
| 0x4
| See offset 0x40. u32 input_crop_width. Must be >=width_min and <=widthval. Where widthval = <width value from the field at offset 0xC>. The low 3-bits of this value must be clear.
|-
| 0x54
| 0x4
| The default for this is 0x0. Must be <=5. For video processing, and when this value is non-zero, the type value at offset 0x0 must not be any of the following: 0x00010004, 0x00010001, 0x0x00100001, or 0x00200001. For video processing, the type value at offset 0x0 must not be 0x80000 when this value at offset 0x54 is non-zero.
|-
| 0x58
| 0x4
| Output format type, see below. SKATER writes value 0x40002 here.
|-
| 0x5C
| 0x4
| Output video width. Must be >=16, and must be <somewidth_statefield.
|-
| 0x60
| 0x4
| Output video height. Must be >=16, and must be <someheight_statefield.
|-
| 0x64
| 0x4
| Output data physical address.
|-
| 0x68
| 0x4
| Additional output data physical address. This is only used when the output format type is value 0x00020001.
|-
| 0x6C
| 0x4
| Unknown, doesn't seem to have a visible affect on the output. Must be <3 for video-processing?
|-
| 0x70
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x74
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x78
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x7C
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x80
| 0x4
| Unknown. Must be <=1 for video processing? Doesn't seem to have a visible affect on the output.
|-
| 0x84
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x88
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x8C
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x90
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x94
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x98
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x9C
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0xA0
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0xA4
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0xA8
| 0x4
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0xAC
| 0x4
| Unknown, must be zero for video-processing.
|-
| 0xB0
| 0x28
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0xD8
| 0x4
| Unknown, must be zero for video-processing.
|-
| 0xDC
| 0x28
| Unknown, doesn't seem to have a visible affect on the output.
|-
| 0x104
| 0x4
| This flag enables using the following 4 words when non-zero.
|-
| 0x108
| 0x4
| u32 output_x_pos. Output X position in the output buffer.
|-
| 0x10C
| 0x4
| u32 output_y_pos. Same as above except for the Y pos.
|-
| 0x110
| 0x4
| u32 output_width_override. The low 2-bits must be clear. When the output width is less than this, this value is used to align the output image width to the specified value via value0-pixels. When this value is less than the output width, this value is used for the output width instead.
|-
| 0x114
| 0x4
| Same as the field at offset 0x110 except for the output height.
|-
| 0x118
| 0x4
| Unknown, when non-zero it seems the output buffer isn't written any more?
|}
The size of this structure is fixed to 0x11C-bytes. The user process does the LINEAR-mem vaddr->physaddr conversion for the above physaddrs, when modifying the config struct before using [[MVDSTD:SetConfig]]. For the above physaddrs that are checked/used, the physaddr must not be 0x0, and the physaddr must be 8-byte aligned(low 3-bits clear).
For color-conversion, the output frame is split into two images via the two output physaddrs.
For *_min/*_max/dimensions_alignment mentioned above: *_min = 16 for color-conversion, 48 for video processing. *_max = 2048 for color-conversion, 4672 for video processing. dimensions_alignment = 4 for color-conversion, 3 for video processing.
The configuration doesn't seem to change at all while SKATER is running video processing(each [[MVDSTD:SetConfig]] input config appears to the same).
====SKATER video processing config====
When processing video, SKATER [[MVDSTD:GetConfig|gets]] the config, updates all of the fields listed below, then uses [[MVDSTD:SetConfig]].
{| class="wikitable" border="1"
|-
!  Offset
!  Size
!  Description
!  Written value
|-
| 0x0
| 0x4
| Input format type.
| 0x00020001(H.264), hard-coded.
|-
| 0x8
| 0x4
|
| Loaded from unique input state. This is the 'range' field in the following debug print: "H264 w=%d h=%d range=%d pics=%d multi=%d\n".
|-
| 0xC
| 0x4
| Input video width.
| Loaded from unique input state.
|-
| 0x10
| 0x4
| Input video height.
| Loaded from unique input state.
|-
| 0x40
| 0x4
| Flag
| 0x1, hard-coded.
|-
| 0x44
| 0x4
|
| Loaded from unique input state.
|-
| 0x48
| 0x4
|
| Loaded from unique input state.
|-
| 0x4C
| 0x4
|
| Loaded from unique input state.
|-
| 0x50
| 0x4
|
| Loaded from unique input state.
|-
| 0x54
| 0x4
|
| 0x0, hard-coded.
|-
| 0x58
| 0x4
| Output format type.
| Loaded from unique input state.
|-
| 0x5C
| 0x4
| Output video width.
| Loaded from unique input state.
|-
| 0x60
| 0x4
| Output video height.
| Loaded from unique input state.
|-
| 0x64
| 0x4
| Output data physical address.
|
|-
| 0x68
| 0x4
| Output data physical address, only set for color-conversion.
| 0x0, hard-coded.
|-
| 0xA8
| 0x4
|
| 0x1, hard-coded.
|-
| 0xAC
| 0x4
|
| 0x0, hard-coded.
|-
| 0xD8
| 0x4
|
| 0x0, hard-coded.
|-
| 0x104
| 0x4
|
| 0x1, hard-coded.
|-
| 0x108
| 0x4
|
| Loaded from unique input state.
|-
| 0x10C
| 0x4
|
| Loaded from unique input state.
|-
| 0x110
| 0x4
|
| Loaded from unique input state.
|-
| 0x114
| 0x4
|
| Loaded from unique input state.
|-
| 0x118
| 0x4
|
| 0x0, hard-coded.
|}
"Loaded from unique input state" refers to the field being loaded from state seperate from the other fields used for this configuration structure.
====Input formats====
{| class="wikitable" border="1"
|-
!  Type value
!  Mode
!  Video processing
!  Color conversion
|-
| 0x00010001
| Color conversion
| N/A
| YUYV422
|-
| 0x00010002
| Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| N/A
|-
| 0x00010004
| Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| N/A
|-
| 0x00010005
| Color conversion, Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| YVYU422
|-
| 0x00010006
| Color conversion, Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| UYVY422
|-
| 0x00010007
| Color conversion, Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| VYUY422?
|-
| 0x00020000
| Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| N/A
|-
| 0x00020001
| Video processing
| H.264
| N/A
|-
| 0x00020002
| Video processing
| H.264, output will be corrupt a little??
| N/A
|-
| 0x00080000
| Video processing
| H.264, output will be gray-scale.
| N/A
|-
| 0x00080001
| Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| N/A
|-
| 0x00180001
| Video processing
| H.264, but no output will be written to output buffer with error code 0xD961710A
| N/A
|}
====Output formats====
{| class="wikitable" border="1"
|-
!  Type value
!  Description
!  Note
|-
| 0x00010001
| YUYV422
| N/A
|-
| 0x00010005
| YVYU422
| A certain MVD state field must not be set to 0x8170 in order to use this.
|-
| 0x00010006
| UYVY422
| see 0x00010005 for the usage requirement.
|-
| 0x00010007
| VYUY422
| see 0x00010005 for the usage requirement.
|-
| 0x00010008
| YUYV422 with some align?
| A certain MVD-module state field must not be set to 0x8170 in order to use this. Whether this can actually be used is determined by another MVD-module state field. 16bit format.
|-
| 0x00010009
| YVYU422 with some align?
| see 0x00010008 for the usage requirements. 16bit format.
|-
| 0x0001000A
| UYVY422 with some align?
| see 0x00010008 for the usage requirements. 16bit format.
|-
| 0x0001000B
| VYUY422 with some align?
| see 0x00010008 for the usage requirements. 16bit format.
|-
| 0x00020001
| Some sort of YUV format?
| 12bit format. The initial output is written to the normal output buffer, then the rest is written to the additional output buffer dedicated to this out-type.
|-
| 0x00040000
| Unknown
| Doesn't write anything to the out-buffer when doing color-conversion.
|-
| 0x00040001
| ARGB1555?
| N/A
|-
| 0x00040002
| RGB565
| N/A
|-
| 0x00040003
| ABGR1555?
| N/A
|-
| 0x00040004
| BGR565
| N/A
|-
| 0x00041000
| Unknown
| Doesn't write anything to the out-buffer when doing color-conversion.
|-
| 0x00041001
| ARGB32
| N/A
|-
| 0x00041002
| ABGR32
| N/A
|}


==MVD Service "l2b:u"==
==MVD Service "l2b:u"==
This one uses the I/O mapped @ 0x10130000.
This one uses the I/O mapped @ 0x10130000.
{| class="wikitable" border="1"
|-
!  Command Header
!  Description
|-
| 0x00010040
| SetInputFormat?
|-
| 0x00020080
| GetInputFormat?
|-
| 0x00030040
| SetOutputFormat
|-
| 0x00040080
| GetOutputFormat
|-
| 0x00050040
| SetTransferEndInterrupt
|-
| 0x00060080
| GetTransferEndInterrupt
|-
| 0x00070080
| GetL2BEndEvent
|-
| 0x00080102
| ?
|-
| 0x00090080
| Waits on a DMA Handle
|-
| 0x000A0102
| MaybeSetRecieving
|-
| 0x000B0080
| isDoneRecieving
|-
| 0x000C0040
| SetInputLineWidth
|-
| 0x000D0080
| GetInputLineWidth
|-
| 0x000E0040
| SetInputLines
|-
| 0x000F0080
| GetInputLines
|-
| 0x00100040
| MaybeSetAlpha
|-
| 0x00110080
| MaybeGetAlpha
|-
| 0x00120040
| StartConversion
|-
| 0x00130040
| StopConversion
|-
| 0x00140080
| isBusyConversion
|-
| 0x00150040
| SetPackageParameter
|-
| 0x00160080
| GetPackageParameter
|-
| 0x00170080
| PingProcess
|}


==MVD Service "l2b2:u"==
==MVD Service "l2b2:u"==
Line 94: Line 783:


==MVD Service "y2r2:u"==
==MVD Service "y2r2:u"==
This one uses the I/O mapped @ 0x10102000.
This is a exact copy of y2r camera service and hence named y2r2.


==MVD Result-codes==
==MVD Result-codes==
Line 106: Line 795:
|  
|  
| Invalid [[MVDSTD:GetConfig|configuration]], mainly when setting the config.
| Invalid [[MVDSTD:GetConfig|configuration]], mainly when setting the config.
|-
| 0xD96170CA
| -2(~1)
|
|-
| 0xE16170C9
| -1(~0)
|
|-
| 0xF96171C8
| -0xFB(~0xFA)
|
|-
| 0x17000
| 0x0
| OK
|-
| 0x17001
| 0x1
| Returned after processing NAL-unit parameter-sets.
|-
| 0x17002
| 0x2
| Busy. When returned by command 0x00090042 during video processing, SKATER uses the {[[MVDSTD:GetConfig]], [[MVDSTD:SetConfig]], and 0x00090042} commands again(same config as before). The SKATER code for this includes this debug string: "H264 output %lld us corrected to %lld us\n".
|-
| 0x17003
| 0x3
|
|-
| 0x17004
| 0x4
| Returned when not all of the input NAL-unit buffer was processed.
|-
| 0x17005
| 0x5
|
|-
| 0x17006
| 0x6
|
|-
| 0x17007
| 0x7
|
|-
| 0x17038
|
|
|}
|}


Retrieved from "https://www.3dbrew.org/wiki/MVD_Services"