GSPGPU:SetAxiConfigQoSMode: Difference between revisions

(3 intermediate revisions by one other user not shown)

Line 32:

|-

| 2-0

| Tidemark

| [https://developer.arm.com/documentation/ddi0422/d/programmers-model/programmable-quality-of-service--progqos-/qos-tidemark-register Tidemark]

|-

| 15-8

| Access control

| [https://developer.arm.com/documentation/ddi0422/d/programmers-model/programmable-quality-of-service--progqos-/qos-access-control-register Access control]

|}

=Description=

This is used to program the QoS (Quality of Service). Tidemark is the maximum allowed number of transactions initiated but not completed, after which next transactions will be limited to certain ~~slaves~~. Access control sets which ~~slaves~~ have this privilege. For more info, see [https://developer.arm.com/documentation/ddi0422/d/~~programmers~~-~~model/register~~-~~summary|~~CoreLink™ NIC-301 r1p2].

This is used to program the QoS (Quality of Service). Tidemark is the maximum allowed number of transactions initiated but not completed with FCRAM, after which next transactions will be limited to certain masters. Access control sets which masters have this privilege. For more info, see [https://developer.arm.com/documentation/ddi0422/d/introduction/about-the-high-performance-matrix CoreLink™ NIC-301 r1p2].

~~Maximum~~ value ~~for~~ tidemark is 7~~. Maximum~~ value for access control is ~~127 (~~1 bit for each slave interface).

Old systems have a total of 7 masters (guesses are ARM11, ARM9, GPU, DSP, CDMA, CSND, AHB); new systems have 3 additional masters (likely NewCDMA and L2 controller, and N3DS-GPU (enabled by [[CONFIG11_Registers#CFG11_GPU_N3DS_CNT|CFG11_GPU_N3DS_CNT]])).

GSP limits the maximum value of tidemark to 7; meanwhile, the maximum value for access control is 2^N-1, 1 bit for each slave interface, where N = number of slave interfaces.

New GSP forces SI7 (corresponding to N3DS-GPU) to be always set.

@@ Line 32: / Line 32: @@
 |-
 | 2-0
-| Tidemark
+| [https://developer.arm.com/documentation/ddi0422/d/programmers-model/programmable-quality-of-service--progqos-/qos-tidemark-register Tidemark]
 |-
 | 15-8
-| Access control
+| [https://developer.arm.com/documentation/ddi0422/d/programmers-model/programmable-quality-of-service--progqos-/qos-access-control-register Access control]
 |}
 =Description=
-This is used to program the QoS (Quality of Service). Tidemark is the maximum allowed number of transactions initiated but not completed, after which next transactions will be limited to certain slaves. Access control sets which slaves have this privilege. For more info, see [https://developer.arm.com/documentation/ddi0422/d/programmers-model/register-summary|CoreLink™ NIC-301 r1p2].
+This is used to program the QoS (Quality of Service). Tidemark is the maximum allowed number of transactions initiated but not completed with FCRAM, after which next transactions will be limited to certain masters. Access control sets which masters have this privilege. For more info, see [https://developer.arm.com/documentation/ddi0422/d/introduction/about-the-high-performance-matrix CoreLink™ NIC-301 r1p2].
-Maximum value for tidemark is 7. Maximum value for access control is 127 (1 bit for each slave interface).
+Old systems have a total of 7 masters (guesses are ARM11, ARM9, GPU, DSP, CDMA, CSND, AHB); new systems have 3 additional masters (likely NewCDMA and L2 controller, and N3DS-GPU (enabled by [[CONFIG11_Registers#CFG11_GPU_N3DS_CNT|CFG11_GPU_N3DS_CNT]])).
+GSP limits the maximum value of tidemark to 7; meanwhile, the maximum value for access control is 2^N-1, 1 bit for each slave interface, where N = number of slave interfaces.
+New GSP forces SI7 (corresponding to N3DS-GPU) to be always set.