Revision as of 23:00, 1 April 2015

Config services

Command Header	Available since system version	Description
0x00010082		GetConfigInfoBlk2
0x00020000		SecureInfoGetRegion
0x00030040		GenHashConsoleUnique/GetTransferableId
0x00040000	3.0.0-5	GetRegionCanadaUSA/IsCoppacsSupported
0x00050000	5.0.0-11	GetSystemModel
0x00060000	6.0.0-11	GetModelNintendo2DS
0x00070040	7.0.0-13	(u8 val) This writes the input u8 to the first byte in the config-block for blkID 0x00160000.
0x00080080	7.0.0-13	(u32 value, u8 type) This goes through a table containing 5 entries, each entry is 2-words. Type0: compare entry-word0 with input value, on match write entry-word1 to cmdreply+8 output. Type1: compare entry-word1 with input value, on match write entry-word0 to output.
0x00090040	7.0.0-13	GetCountryCodeString
0x000A0040	7.0.0-13	GetCountryCodeID
0x000B0000	9.6.0-X	This writes u8 value 0x1 to cmdreply[2].

Command Header	Available since system version	Description
0x04010082		GetConfigInfoBlk8
0x04020082		SetConfigInfoBlk4
0x04030000		UpdateConfigNANDSavegame
0x04040042		GetLocalFriendCodeSeedData
0x04050000		GetLocalFriendCodeSeed
0x04060000		SecureInfoGetRegion
0x04070000		SecureInfoGetByte101
0x04080042		SecureInfoGetSerialNo
0x04090000		UpdateConfigBlk00040003
0x040A0000	?	?
0x040B0000	?	?
0x040C0000	?	?
0x040D0040	?	?
0x040E0000	?	?
0x040F0000	?	?

CfgS command 0x04060000(SecureInfoGetRegion) is used by NIM module to determine the SOAP RegionId, when sending SOAP requests. See here.

Command Header	Description
0x04010082	GetConfigInfoBlk8
0x04020082	SetConfigInfoBlk4
0x04030000	UpdateConfigNANDSavegame
0x04040042	GetLocalFriendCodeSeedData
0x04050000	GetLocalFriendCodeSeed
0x04060000	SecureInfoGetRegion
0x04070000	SecureInfoGetByte101
0x04080042	SecureInfoGetSerialNo
0x04090000	UpdateConfigBlk00040003
0x08010082	GetConfigInfoBlk8
0x08020082	SetConfigInfoBlk4
0x08030000	UpdateConfigNANDSavegame
0x080400C2	CreateConfigInfoBlk
0x08050000	DeleteConfigNANDSavefile
0x08060000	FormatConfig
0x08070000	This basically just returns result-code value 0x0, due to code this eventually executes being NOPed out.
0x08080000	This updates the config blocks for blkIDs 0x0 and 0x20000. In certain cases this may call the code for FormatConfig.
0x08090000	This updates the config block for blkID 0x60000.
0x080A0000	This updates the config block for blkID 0x00040001.
0x080B0082	SetGetLocalFriendCodeSeedData
0x080C0042	SetLocalFriendCodeSeedSignature
0x080D0000	DeleteCreateNANDLocalFriendCodeSeed
0x080E0000	VerifySigLocalFriendCodeSeed
0x080F0042	GetLocalFriendCodeSeedData
0x08100000	GetLocalFriendCodeSeed
0x08110084	SetSecureInfo
0x08120000	DeleteCreateNANDSecureInfo
0x08130000	VerifySigSecureInfo
0x08140042	SecureInfoGetData
0x08150042	SecureInfoGetSignature
0x08160000	SecureInfoGetRegion
0x08170000	SecureInfoGetByte101
0x08180042	SecureInfoGetSerialNo

This only handles the commands listed under the above "Config services", no additional commands.

This is an interface for the "SPI::NOR" service, for accessing the Wifi NVRAM/SPI Flash.

@@ Line 47: / Line 47: @@
 | [[7.0.0-13]]
 | [[Cfg:GetCountryCodeID|GetCountryCodeID]]
+|-
+| 0x000B0000
+| [[9.6.0-24|9.6.0-X]]
+| This writes u8 value 0x1 to cmdreply[2].
 |}