Difference between revisions of "SPI Registers"
Jump to navigation
Jump to search
(Update SPI_NEW_DONE) |
|||
Line 175: | Line 175: | ||
! Old3DS | ! Old3DS | ||
! Name | ! Name | ||
+ | |- | ||
+ | | 0-5 | ||
+ | | Baudrate? | ||
|- | |- | ||
| 6-7 | | 6-7 | ||
Line 184: | Line 187: | ||
| 15 | | 15 | ||
| Busy/enable | | Busy/enable | ||
+ | |} | ||
+ | |||
+ | {| class="wikitable" border="1" | ||
+ | ! Device id | ||
+ | ! Device select bits | ||
+ | |- | ||
+ | | 0, 3, >=6 | ||
+ | | 0 | ||
+ | |- | ||
+ | | 1, 4 | ||
+ | | 1 | ||
+ | |- | ||
+ | | 2, 5 | ||
+ | | 2 | ||
|} | |} | ||
Revision as of 13:30, 25 March 2016
Registers
Old3DS | Name | Address | Width | Used by |
---|---|---|---|---|
Yes | SPI_CNT0 | 0x10142000 | 2 | |
Yes | SPI_DATA0 | 0x10142002 | 1 | |
Yes | SPI_NEW_CNT0 | 0x10142800 | 4 | |
Yes | SPI_NEW_DONE0 | 0x10142804 | 4 | |
Yes | SPI_NEW_BLKLEN0 | 0x10142808 | 4 | |
Yes | SPI_NEW_FIFO0 | 0x1014280C | 4 | |
Yes | SPI_NEW_STATUS0 | 0x10142810 | 4 | |
Yes | SPI_CNT1 | 0x10143000 | 2 | |
Yes | SPI_DATA1 | 0x10143002 | 1 | |
Yes | SPI_NEW_CNT1 | 0x10143800 | 4 | |
Yes | SPI_NEW_DONE1 | 0x10143804 | 4 | |
Yes | SPI_NEW_BLKLEN1 | 0x10143808 | 4 | |
Yes | SPI_NEW_FIFO1 | 0x1014380C | 4 | |
Yes | SPI_NEW_STATUS1 | 0x10143810 | 4 | |
Yes | SPI_CNT2 | 0x10160000 | 2 | |
Yes | SPI_DATA2 | 0x10160002 | 1 | |
Yes | SPI_NEW_CNT2 | 0x10160800 | 4 | |
Yes | SPI_NEW_DONE2 | 0x10160804 | 4 | |
Yes | SPI_NEW_BLKLEN2 | 0x10160808 | 4 | |
Yes | SPI_NEW_FIFO2 | 0x1016080C | 4 | |
Yes | SPI_NEW_STATUS2 | 0x10160810 | 4 |
SPI_CNT
This is the old NDS/DSi SPI interface.
Old3DS | Name |
---|---|
0-1 | Baudrate (0=4MHz/Firmware, 1=2MHz/Touchscr, 2=1MHz/Powerman., 3=512KHz) |
2-6 | Not used (Zero) |
7 | Busy Flag (0=Ready, 1=Busy) (presumably Read-only) |
8-9 | Device Select (0-3) |
10 | Transfer Size (0=8bit/Normal, 1=16bit/Bugged) |
11 | Chipselect Hold (0=Deselect after transfer, 1=Keep selected) |
12-13 | Not used (Zero) |
14 | Interrupt Request (0=Disable, 1=Enable) |
15 | SPI Bus Enable (0=Disable, 1=Enable) |
SPI_NEW_CNT
This is an alternative faster interface introduced with the 3DS.
Old3DS | Name |
---|---|
0-5 | Baudrate? |
6-7 | Device Select |
13 | Transfer Direction? (0=Incoming, 1=Outgoing) |
15 | Busy/enable |
Device id | Device select bits |
---|---|
0, 3, >=6 | 0 |
1, 4 | 1 |
2, 5 | 2 |
SPI_NEW_DONE
When the transfer is finished, a 0 is written to this register.
SPI_NEW_BLKLEN
The number of bytes to be sent/read is written to this register.
SPI_NEW_FIFO
32-bit FIFO for reading/writing the SPI payload.
SPI_NEW_STATUS
Bit0: FIFO busy.