Difference between revisions of "GPIO Services"
Jump to navigation
Jump to search
Line 65: | Line 65: | ||
| 0x0007.... | | 0x0007.... | ||
| GetIRGPIO(u32 unk1,u32* ret) | | GetIRGPIO(u32 unk1,u32* ret) | ||
− | | 0x10147000, 0x10147010, 0x10147014, 0x10147020, | + | | 0x10147000, 0x10147010, 0x10147014, 0x10147020, 0x10147028 |
|- | |- | ||
| 0x0008.... | | 0x0008.... |
Revision as of 11:54, 19 July 2016
GPIO Service Names
Service name | Permitted interrupts bitmasks |
---|---|
gpio:CDC | 0x48 |
gpio:MCU | 0x48020 |
gpio:HID | 0x4301 |
gpio:NWM | 0x40020 |
gpio:IR | 0xEC0 |
gpio:NFC | 0x13000 |
gpio:QTM | 0x20000 |
For the mapping between interrupts bitmasks and IRQs see: GPIO:BindInterrupt#Supported_values.
The commands for these services are identical.
GPIO Services
Command Header | Description | Uses GPIO Regs |
---|---|---|
0x0001.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147020 |
0x0002.... | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147020 |
0x0003.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147024 |
0x0004.... | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147024 |
0x0005.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147024 |
0x0006.... | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147024 |
0x0007.... | GetIRGPIO(u32 unk1,u32* ret) | 0x10147000, 0x10147010, 0x10147014, 0x10147020, 0x10147028 |
0x0008.... | SetIRGPIO(u32 unk1,u32 unk2) | 0x10147010, 0x10147014, 0x10147020, 0x10147028 |
0x00090082 | BindInterrupt | None |
0x000A0042 | UnbindInterrupt | None |