ARM11 Interrupts

From 3dbrew
Jump to navigation Jump to search

Interrupts

Interrupt priority is 0-0xF

Private Interrupts

Each CPU core has 32 software interrupts that are private and belong to that core. These interrupts are numbers 0-0x1F for each core. The hardware interrupts are not core-specific and start at interrupt ID 0x20.

IRQ Listener Description
0-0x5 MPCore software-interrupt.
0x6 Kernel MPCore software-interrupt.
0x7 MPCore software-interrupt.
0x8 Kernel MPCore software-interrupt. Used for scheduling.
0x9-0xF MPCore software-interrupt.
0x1D Kernel MPCore timer.
0x1E Kernel MPCore watchdog.


Hardware Interrupts

There are 0x60 hardware interrupts starting at 0x20 and continuing up to 0x7F. These are not private and are accessible from any core.

IRQ Listener Description
0x28 gsp, TwlBg ?
0x29 gsp, TwlBg ?
0x2A gsp, TwlBg ?
0x2B gsp, TwlBg ?
0x2C gsp, TwlBg ?
0x2D gsp, TwlBg ?
0x30 Kernel ?
0x39 Kernel DMA
0x3A Kernel DMA
0x3B Kernel DMA
0x40 nwm WIFI SDIO Controller @ 0x10122000
0x41 nwm ?
0x42 nwm_dev? WIFI SDIO Controller @ 0x10100000
0x45 mvd (New3DS) ?
0x46 mvd (New3DS) ?
0x48 camera ?
0x49 camera ?
0x4A dsp ?
0x4B camera Y2R Conversion Finished
0x4C TwlBg ?
0x4D TwlBg ?
0x4E mvd (New3DS) ?
0x4F mvd (New3DS) ?
0x50 pxi, TwlBg ?
0x51 pxi, TwlBg ?
0x52 pxi, TwlBg Send Fifo Empty
0x53 pxi, TwlBg Receive Fifo Not Empty
0x54 i2c, TwlBg ?
0x55 i2c, TwlBg ?
0x56 spi, TwlBg ?
0x57 spi, TwlBg ?
0x58 Kernel ?
0x59 TwlBg ?
0x5A mic ?
0x5C i2c, TwlBg ?
0x60 gpio, TwlBg ?
0x62 gpio, TwlBg ?
0x63 gpio, TwlBg ?
0x64 gpio, TwlBg ?
0x66 gpio, TwlBg ?
0x68 gpio, TwlBg ?
0x69 gpio, TwlBg ?
0x6A gpio, TwlBg ?
0x6B gpio, TwlBg ?
0x6C gpio, TwlBg ?
0x6D gpio, TwlBg ?
0x6E gpio, TwlBg ?
0x6F gpio, TwlBg ?
0x70 gpio, TwlBg ?
0x71 gpio, TwlBg ?
0x72 gpio, TwlBg ?
0x73 TwlBg ?


There are 2 tables in the ARM11 kernel: the first has 32 * 2(or 32 * 4) 8-byte entries. This table is for the private interrupts that belong to each core. The data for each interrupt can be found by doing table_base + (core_num * 0x100) + (intr_num * 8). The second table is for public hardware interrupts and the data for each interrupt can be retrieved by doing table_base + (intr_num * 8).