Process Services
Jump to navigation
Jump to search
Command Header | Available since system version | Description |
---|---|---|
0x00010244 | 1.0.0-0 | SignRsaSha256 |
0x00020244 | 1.0.0-0 | VerifyRsaSha256 |
Not implemented | SetAesKey (just returns error 0xD8C107F4) | |
0x00040204 | 1.0.0-0 | EncryptDecryptAes |
0x00050284 | 1.0.0-0 | EncryptSignDecryptVerifyAesCcm |
0x00060040 | 1.0.0-0 | GetRomId (u32 processID) |
0x00070040 | 1.0.0-0 | GetRomId2 (u32 processID) |
0x00080040 | 1.0.0-0 | GetRomMakerCode (u32 processID) |
0x00090000 | 1.0.0-0 | GetCTRCardAutoStartupBit |
0x000A0000 | 1.0.0-0 | GetLocalFriendCodeSeed |
0x000B0000 | 1.0.0-0 | GetDeviceId |
0x000C0000 | 1.0.0-0 | GatherEntropy |
0x000D0042 | 1.0.0-0 | GenerateRandomBytes |
0x000E0082 | New3DS = 8.1.0-0_New3DS, Old3DS = 9.0.0-20 | Interface for Process_Services_PXI New3DS command 0x04010084. |
0x000F0082 | New3DS = 8.1.0-0_New3DS, Old3DS = 9.0.0-20 | Interface for Process_Services_PXI New3DS command 0x04020082. |
0x00100042 | New3DS = 8.1.0-0_New3DS, Old3DS = 9.0.0-20 | Interface for Process_Services_PXI New3DS command 0x04030044. |
0x00110042 | New3DS = 8.1.0-0_New3DS, Old3DS = 9.0.0-20 | Interface for Process_Services_PXI New3DS command 0x04040044. |
These commands are an interface for Process_Services_PXI.
For GetRomId, GetRomId2, and GetRomMakerCode, PS-module uses FS:GetProgramLaunchInfo with the processID which was sent to PS-module via the command input. If GetProgramLaunchInfo fails, PS-module returns error 0xC90107FA. When the mediatype is value2 for gamecard, the PSPXI command is used, otherwise PS-module just clears the output data for the command response.
PS module does not use any CheckNew3DS commands: commands 0x000E0082..0x00110042 are handled by PS module regardless of whether this is running on Old3DS/New3DS. Using these commands on Old3DS will result in Process9 returning an invalid command header error. NFC module uses all of these new commands for New3DS.