3DS开发机软件

Revision as of 16:22, 30 March 2013 by Syphurith (talk | contribs) (translation+)

本文件说明由3DS开发机提供的可用软件功能。

以下说明除了特别声明的,都来自SDK的37904版本。想看3DS开发机硬件信息,请访问这里Gbatemp上的开发机硬件信息(英文)

漂亮干净的开发机软件和主界面菜单图片。点击查看高画质版。 - Xcution









开发机菜单

 

 
开发机菜单截图
 
旧版的开发机菜单截图

这个应用程序在上屏显示开发机菜单的固件和版本,在TWL(DSi) NAND扇区SD卡有效时候显示剩余空间。它同样提供当前文件或者选中的设备的信息,下屏显示引导操作指南。下屏幕有三个不同的窗体,分别是:

  • 程序Programs-用这个窗体可以从NANDSD card和slot 1 卡槽(仅仅对一部分应用程序有效,请看下方的开发机目录版本和对应范围的应用程序。)读取应用程序。程序会依照"专有ID' '产品号码'"显示。安装过的Title可以从此菜单移除。
  • 导入Import-用这个窗体可以将编译成.CIA文件的Title安装到SD卡(在新版中为"SDMC")。
  • 硬件HIO- 这个是新版开发机目录的内容。会输出'Not found DEVMENU_ROOT'. This 'DEVMENU_ROOT' is not supposed to be on the 3DS' SDMC. (可能是需要NAND上有什么目录,或者需要从CTR调试器的SDMC卡槽加载?)
  • 存档ExtData-用这个窗体可以删除包括所有ExtData在内的3DS的存档ExtData

(注意所有的零售版3DS游戏都不会被3DS开发机识别,开发机菜单会在'Programs'中显示"Unknown Card",并不会在上屏提供其他信息。)

(另外注意,如果一个3DS可执行文件由于文件自身诸如内存受限的限制标记,不能在开发机目录启动的话,产品ID会用黑色底红色字显示。)

开发机菜单版本 可用的Title类型
?- 32640 - 33437 0000(仅支持NAND),0010,8004,8005,8011
35887 0000(仅支持NAND),8004
37785 - 40909 -? 0000(NAND和SDMC),8004
?- 47586 -? 0000(NAND和SDMC),0002, 8004

Config

 

 
Config Menu Screenshot

This application is a configuration menu for the 3DS, which has the following options:

  • Reset Settings - Resets all settings to default.
  • Hid Setting - (human interface device) Calibrates Touch-Pad and Analog stick.
  • Rtc Setting - (real time clock) Sets system time.
  • Lcd Setting - Sets display settings as found in the home menu as well as Flicker settings.
  • User Info Setting - Allows username change and "NG NAME FLAG" to be set to true or false.
In later versions of Config, "User Info Setting" also has :
  • CountryId - Changes 3DS between installed countries.
  • RegionId - Changes between the location in the selected country.
  • Other Setting(branches off into other settings) -
  • Sound Mode - mono/stereo/surround
  • System Mode - Changes Memory Allowance.
  • Prod - 64MB Memory mode (Home Menu can usually only run in this mode and most retail-looking units cannot switch out of this mode)
  • Dev1 - 96MB Memory mode
  • Dev2 - 80MB Memory mode
  • Dev3 - 72MB Memory mode
  • Dev4 - 32MB Memory mode
All CTR Debuggers/Prototype units can change memory allowance. For Developer Test Units, the ability to change Memory Allowance, appears to be dependent on an option when buying the Test Unit. (similar to having a choice to purchase IS_Nitro's Wireless/USG options when buying an IS_Nitro from Nintendo)
On some Test Units, it's possible to run the Home Menu outside of Prod. However, software with limited memory (such as the web browser) cannot be launched from the home menu if the home menu is outside of Prod.
  • Exception handler - Selects whether to enable or disable the application's handling of exceptions that arise in the non-debug environment - enable/disable
  • Break Stop - (enable/disable) - Selects whether to enable or disable stopping the application when a break is encountered in the non-debug environment. If the application is not made to stop, it quits on a break.
  • Menu - (Home Menu/Test Menu) This function edits the configuration field containing the menu TID for dev units, allowing the user to choose between the Home Menu or the Test Menu, as the menu loaded by the NS module.
  • Language - same options found in the Language section of System Settings but also has an "invalid" option
  • Dlp Force Child Import - (enable/disable) - normally the 3ds caches downloaded "Download Play (Dlp)" applications on the nand and only re-downloads, overwriting the cached copy if the version application being requested to downloaded is higher than what is currently present on the nand. Enabling this option forces the 3ds to download and overwrite the cached copy on the nand, regardless of the version of the application being downloaded. This is of course for testing purposes.
  • Debug Mode - (enable/disable) - Toggles Debug environment?
In later versions of Config, "Other Setting" also has :
  • FS Latency Emulation - Filesystem Latency, in milliseconds (0ms-2550ms). Selection is in increments of 10. (ie 0ms->10ms->20ms...)
  • Coppacs Setting - Unknown (stuck on 'not restricted')
  • Test Setting - Test calibration of touch pad and joystick
  • Eula Setting - Allows user to change "Agree Version" namely:"ff.ff" the two symbol sets are interchangeable with combination variations from aa to 99 (default is 00.00 where the Eula is not accepted yet).
  • Stereo Camera Cal for Check - Camera test (?) as options to "write strange data(excess Z-rot) and "reset to factory default".
  • Gyro / Accel Cal for Check - Allows Gyro and Accelerometer to be calibrated.
  • Ctr Info Setting - Changes settings to that found on the ctrsetting.txt on an SD .

Downloadplay Client

 
Downloadplay Client Screenshots

 


Even though a Developer 3DS has a "Download Play" application visually identical to the retail 3DS application, the "Downloadplay Client" application can be installed as an alternative to the regular Download Play application. (Note: a Developer 3DS' and Retail 3DS' cannot receive download play 'children' from each-other.) This Developer application is a stripped down version of 'Download Play' which has the following options and limitations:

  • It can only download 3ds download play titles
  • Scraps the GUI found in the normal Download Play application(see screenshot)
  • Can select from a maximum of 16 Download play 'servers'

This application is clearly used for easy testing of download play 'child' apps, without the hassle of constantly re-navigating the normal Download Play interface



Network Settings

 
Network Settings Screenshots

 

This Developer application allows the users to directly modify the following from any of the three possible network setting 'slots'

  • Security Mode :(the wireless encryption the network is using) OPEN/WEP 40bit/WEP 104bit/128bit/WPA TKIP/WPA2 TKIP/WPA AES/WPA2 AES
  • SSID :(self-explanitory) maximum 32 characters
  • KEY :(the key for the encrytion is here in plain text) the maximum length depends on encryption type
  • AutoDNS :(whether the 3DS obtains the DNS automatically or not) |True-3DS obtains the DNS automatically|False-3DS uses the DNS server address provided by the user(it is possible to edit this here)|

At the bottom of the setting options there are two choices:

  • Write Setting & Connect Test To AP - Applies the settings above and performs a connection test(note any settings made in system settings for this connection, which are not present in the above settings will be nullified, for example any proxy server settings)
  • Remove Setting - removes all settings for this 'slot'



存档数据文件管理

 
SaveDataFiler Screenshots

 


这个3DS开发机应用程序允许用户将存档文件或者extdata从SD卡导入导出。窗体有三个界面:

  • User - 这里可以将3DS应用程序和3DS游戏卡带(不是DS游戏卡带)的存档导出到SD卡。存档不能从这里删除。
  • ExtData - 这里可以将应用程序的ExtData删除,或者导出到SD卡以便之后使用。
  • SD - 这里可以将SD卡上ExtData或者应用程序的存档导入到3DS或者3DS游戏卡带中。另外也可以从SD卡删除Extdata或应用程序存档。


用户的存档会导出到sdmc:/filer/UserSaveData/YYYYMMDD(时分秒)


它会在那个路径建立一个文件夹和三个文件。导出到上方路径的两个文件是<uniqueID>.dat和<uniqueID>_.dat,另有一个名为/<uniqueID>/的目录,内有<ExHeader Name>.dat文件。

CTR菜单选择器

 
菜单选择器截图

 

这个应用程序,可以利用更改菜单线程控制符(TID)的设置区域更改当前的'活动中菜单'(正在使用的那个),允许用户从主菜单测试菜单选择,之后用NS模块加载菜单。这个应用程序是设置菜单作为"菜单"选择功能引入的,之后从中分离为一般的应用程序。

CecLotcheckTool

 
CecLotcheckTool Screenshot

 

This application is used to manage CECs (Chance Encounter Communications, AKA StreetPass hits) for any of the twelve possible applications used on the 3DS, if there are any. The application has twelve possible slots which can be filled by BOXes . The BOXes are individual applications which are permitted by the user to use CECs, such as StreetPass Mii Plaza or Nintendo 3DS Sound. And as such, the boxes in this application correspond to the applications in 'StreetPass Management', in 'System Settings' (StreetPass Management is accessible from retail 3DSs). The functions of this application:





  • <Y> BOX Options - this opens up a sub menu with the following options(when hovering over Nintendo 3DS Sounds BOX - the only one I can test the app with):
  • Box Info - Gives the Out-Box parameters  




  • Message Info (OUT-BOX) - Gives the Message Parameters For the current BOX  



  • Dummy Message Settings - Not quite sure what the options do here  




  • <A> Create Dummy BOXes - Creates dummy BOXes to fill any unused slots. (does not overwrite any present slots)
  • <X> Delete BOXes - Deletes all of the BOXes from the slots.
  • <START> CEC Filter Reset - I can only guess that it erases data collected by CEC enabled apps.


BossLotCheckTool

 
BossLotCheckTool Screenshot

 

This application is used to manage BOSS (SpotPass) tasks/data for 3DS titles which utilise BOSS communications. 'Pokedex' is an application which utilizes BOSS comunications. This application also displays the 3DS's friend code, although this code is not to be confused with the 3DS's Friend Card code found in 'Friends List'. The user can browse by unique ID the 3DS titles(excluding system titles) registered to use BOSS. For each title you can view details about the downloaded 'NsData' which accompanies BOSS downloads, view the BOSS task lists (implies applications can perform more than one BOSS task). You can also view various details about each BOSS task, including:

TaskStatus : DONE?
TaskExecCount : How many times the BOSS task has been executed
TaskExecInterval : Period of time (in seconds) in the task is to be executed, in intervals
TaskPriority : Is a number value 
URL : The URL to the BOSS content
AP Info : NONE?
TaskResultCode : Success or not
HTTP_StatusCode : Self explanatory 
DataSize : Size of Content (in bytes)
Last_Modified : Last time the BOSS content (on server) was modified
StartTime : when the BOSS task was registered
OptOut : Whether the user can/has opted out of BOSS communication for this task

It also possible to manually execute the BOSS task from here

Stereo Camera Calibrator

 
Stereo Camera Calibrator Screenshot

 

The Stereo Camera Calibrator (SCC), in a nutshell, allows the user to adjust the configuration of the outer cameras in relation to each other. It can be configured automatically by positioning the 3DS a set distance away from a special chart. It can also be configured manually, by setting the rotation of each camera image and the size of the right eye camera. The 3D effect can be perceived by superimposing the right eye camera image translucently with the left eye camera image or by viewing the 3D image directly by use of the parallax barrier in the 3DS Screen.


模型查看器

 
3DS模型查看器截图

 

如名字所示,这个应用程序允许用户查看模型。它需要和CTR调试器配合使用,以便于可以将到模型输入程序内存。不过程序可以在测试机上运行,而模型限定为三条彩色线描述三个维度(x,y,z)。模型也可以旋转或放缩,查看方式分别可以用摇杆和十字键。当然了这个应用程序利用了3D机能。

Friend Testing Partner

 
Friend Testing Partner Screenshot

 

The Friend Testing Partner application is used to test/monitor the 3DS's Friend List function. It allows the user to test various functions of the 3DS's out-going Friend Card, by giving the following options:

  • Master Control - (RUN/STOP) (STOP is the default setting) when ‘STOP’ is selected the 3DS Friend Card uses the user’s settings/data. When ‘RUN’ is selected the 3DS Friend Card uses the dummy settings/data chosen to test from the settings bellow.
  • Login/Logout - (ON/OFF) (ON is the default setting) What effect this has on the Friend Card is not known
  • Playing Title - (ON/OFF) (ON is the default setting) When ‘ON’ is selected the currently used title is ignored and a dummy applications are cycled through as the ‘Playing Title’ approximately every ten seconds in its place. The dummy applications used are the applications found in Firmware version 1.0.0-0 of a retail 3DS including the ‘Nintendo Zone viewer’ app. When ‘OFF’ is selected the currently used title (which is the Friend Testing Partner app) is used as the ‘Playing Title’
  • Mode Description - (ON/OFF) (ON is the default setting) When ‘ON’ is selected the Software in Use(Playing Title) is accompanied by the Date and Time found on that user’s 3DS. The Mode Description is refreshed every ten or so seconds. When ‘OFF’ is selected the date and time on the user’s 3DS is not displayed.
  • Message - (ON/OFF) (ON is the default setting) When ‘ON’ is selected the message made by the user is replaced(not overwritten as it reverts back to the user’s choice when this is ‘OFF’) by the current date and time in the format “YYYYMMDD HHMMSS”, this is refreshed every ten or so seconds.
  • Mii - (ON/OFF) (ON is the default setting) When 'ON' the currently used Mii is replaced with one of 4 dummy Miis and cycles them through every ten seconds with a new dummy mii. This effect can only be seen from another 3DS not the host
  • Favorite Title (ON/OFF) (ON is the default setting) When 'ON' is selected, the user’s favorite title is replaced with a dummy, which is replaced every 10 or so seconds.

Also this application allows the user to monitor the whether the 3DS is online or not and whether the 3DS’s Friend Presence is online or offline. Every time a dummy setting is refreshed it is displayed on the top screen with a time stamp.


游戏金币设置器*

 
游戏金币设计器截图

 

这个应用程序适用于设置3DS计步器的游戏金币的。显然这是为了开发者能测试自己游戏中,玩家用获得的游戏金币换取游戏内内容或类似东西的部分。他有一个非常简单的界面显示当前有多少游戏金币,和调整所需游戏金币的设置。以下是每种控制的解说:

  • LEFT/RIGHT - 用十字键只能更改所需的目标金币数量,从0到300。
  • A - 设置'当前数量'(也就是系统有多少游戏金币),便于测试用户设置的游戏金币'目标数量'。
  • L+R+X - "今天不再增加"("Preclude today's Increment")不知道这到底怎么影响到游戏金币数量的。

TWL开发工具

以下是用于DSi/DS模式的开发工具,能为安装到TWL NAND打包为CIA

NINTENDO DS - WMtest

 
WMtest Screenshot

 

This application is a TWL(DSi) application compiled for use on the 3DS. It is an wireless test tool with its uses explained below:

  • Scan Test - Scans Wireless channels 1-13(can be focused on one specific channel) for broadcasting stations. It can detect two types of broadcasting stations:

Wifi Access Points - Giving the Mac Address, Broadcasting Channel, 'c', and the SSID

DS Stations such as DS Download stations and Pokemon distributors - Giving the Mac Address, Brodcasting Channel, TGID and GGID

  • ScanEx Test - and has two Scan Types. Passive which lets you individually scan channels 1-13 (only one at at time) and the DS distribution channels (1,7,13 all at once). And Active which scans all 13 channels at once. when it finds a channel it prints on the bottom screen next to 'Found' 'bssDescCount='
  • MeasureChannel Test - not quite sure what this does but it for a given channel it gives a ratio(in percentage form), which it finds in its allocated test time ranging from 10ms to 1000ms. And for every interval of time which is specified, it tests and gives a ratio.
  • Noise Mode - Seeks wireless channels in which to make wireless noise (This is not made very clear on the app). You can specify the:

Channel where the scanner will seek to make noise

Noise Rate, ranging from 0% to 100%

Frequency, ranging from 10ms to 50ms

Seek Mode, ranging from 1000ms to 1500ms

When the settings are chosen the top screen has two counters which display 'Noise ON count' and 'Noise OFF count' the counters are affected by the noise rate. Starting at 0% the 'Noise ON count' does not change but as the Noise rate gets closer to 100% the count moves and gets faster as Noise rate reaches 100%. For 'Noise OFF count' it is the exact opposite to the ' Noise ON count' in regards to counting.



* 这里使用了一个替代图标换掉了原来应用程序使用的一般图标,以免和其他应用程序混淆。原来的一般图标可以在图标的History页面查看。