3DS Virtual Console

Revision as of 23:17, 24 May 2020 by Owowhatsthis (talk | contribs) (Fix GBA VC savedata info)

There are several types of VC titles: NES/GB/GBC VC titles, SNES VC titles, GameGear VC titles and GBA VC titles. Except for GBA VC, the games are ran using emulators.

NES/GB/GBC VC

An emulator application + VC ROM in the NCCH RomFS (among other things in the RomFS).

The original emulator builds include support for all these three platforms, not specific to just the included ROM platform. However, releases intended for NES games have a red menu, optional switching between the two controllers, a different X button mapping (B instead of menu), optional Download Play support, and a never used multi-rom support; while Game Boy versions have a green theme and optional 3D border.

Early builds (of Ambassador NES games at least) did not support savestates.

The emulator officially used for Pokemon games removes savestate support in favor of a Link Cable "implementation" involving hooking the games' network functions according to the patch files. (Partial documentation of the patch format)

This emulator includes GBA support, however the GBA emulation for this this is somewhat slow. This was presumably implemented before AGB_FIRM was.

Unlike Wii VC, the 3DS VC ROMs for NES use the "TNES" header.

RomFS

  • "rom:/rom/" This directory contains the ROM file(s). Filenames used under here don't matter: the filename is determined by the emulator app by doing a directory read.
  • "rom:/shaders/" This directory contains GPU shaders used by the emulator app: .shbin, .csdr, and .obj.
  • "rom:/VCM/" This directory contains graphics, audio, and text used by the emulator app.
  • "rom:/agb.bin" GBA BIOS.
  • "rom:/buildtime.txt" Emulator app build timestamp.
  • "rom:/config.ini" Emulator configuration .ini, contains sections for all supported 3DS VC platforms.
  • "rom:/<rom_name>.patch" rom_name = filename from the rom directory. This .ini contains patches for the ROM.
  • "rom:/shader.shbin" GPU shader.

Savedata

The savedata can contain:

  • "rsm1.dat": Same format as the below rsm2.dat. Probably used for the "restore-point".
  • "rsm2.dat": Current emulator save-state, for storing/loading state at VC-title launch/exit.
  • "sav.dat": The actual savedata used by the emulated ROM.
  • "SecureValue": The random number used by Anti Savegame Restore. No known version of the emulator implements both savestates and secure value.

Overwriting sav.dat with 0xFF-bytes doesn't have any affect on the actual emulator. Doing that with most of the rsm*.dat data doesn't crash anything.

SNES VC

An emulator application + VC ROM in the NCCH RomFS (among other things in the RomFS). SNES VC titles are New 3DS exclusive.

RomFS

  • "rom:/ErrorMessage/" This directory contains text used by the emulator app.
  • "rom:/shader/" This directory contains .shbin GPU shaders used by the emulator app.
  • "rom:/VCM/" This directory contains text used by the emulator app.
  • "rom:/caravel.bcsar" This file contains audio used by the emulator app.
  • "rom:/ctrl_change.arc" This file contains graphics used by the emulator app.
  • "rom:/data.bin" This file contains the ROM and other data. See below for documentation.
  • "rom:/ErrorMessage.arc" This file contains graphics used by the emulator app.
  • "rom:/KTR-XXXX.icn" Copy of the SMDH of the game.
  • "rom:/shader.shbin" GPU shader.
  • "rom:/nnfont_RectDrawerShader.shbin" GPU shader.
  • "rom:/VCM.arc" This file contains graphics used by the emulator app.

data.bin structure

The file begins with a header (all values are little-endian):

START SIZE DESCRIPTION
0x00 0x4 Always 0x00000100
0x04 0x4 File size
0x08 0x4 Always 0x00000030
0x0C 0x4 Always 0x00000050
0x10 0x4 Start of the ROM (always 0x00000060 in official VC)
0x14 0x4 End of the ROM
0x18 0x4 Start of the footer region (presumably an index for the PCM audio samples). Matches end of file/file size if PCM data is missing
0x1C 0x4 Always 0
0x20 0x4 Start of decompressed SDD-1 graphics data region. Matches end of file/file size if no SDD-1 chip is present
0x24 0x8 Product ID (KTR-XXXX), determines filenames in savedata
0x2C 0x4 Always 0
0x30 0x1 Emulation speed in FPS (always 0x3C in official VC)
0x31 0x3 ROM size
0x34 0x1 Always 0
0x35 0x3 Size of the converted PCM audio samples region (starting after ROM). 0 if PCM data is missing
0x38 0x1 Always 0
0x39 0x2 Footer region size. 0 if PCM data is missing
0x3B 0x2 Always 0
0x3D 0x2 Preset ID (varies for each game). A full list of know Preset IDs (shared by WiiU/SNESC/Switch SNES emulators) can be found here
0x3F 0x1 Always 0x2
0x40 0x1 Sound volume
0x41 0x1 ROM type (0x15 == HiROM/0x14 == LoROM)
0x42 0xE Always 0
0x50 0x4 Always 0x00000003
0x54 0x4 Always 0x00000001
0x58 0x8 Always 0

The 0x60 header is followed by the SNES ROM, often altered to replace audio samples with pointers to external PCM audio files converted from the game, presumably to speed up emulation (these pointers can be found by looking for "PCMF" in the ROM, as seen on Wii VC). The ROM is then optionally followed by the PCM audio files, by the SDD-1 decompressed graphics data (the emulator doesn't properly emulate the chip, presumably because of hardware constraints) and by a footer which appears to be an index for the PCM audio data. There are no setting fields for specific cart features, with the exception of Special Chip, and it appears that the emulator has "game presets" stored in its own code, which determines more game-specific settings. The Special Chip can also be enabled by the game Preset ID. Each official VC release has a different preset ID in the header. The supported Special Chips are: DSP1, C4 and DSP2.

A similar structure can be found on Wii U, SNES Classic and Switch Mini emulator [1]

Savedata

The savedata contains:

  • "KTR-XXXX.cfg": Appears to contain the "preset ID" and possibly more game/save information.
  • "KTR-XXXX.vea": Current emulator save-state, for storing/loading state at VC-title launch/exit.
  • "KTR-XXXX.ves": The actual savedata used by the emulated ROM.

Filenames are determined in the ROM header.

GBA VC

GBA VC is run by AGB_FIRM. RomFS isn't used for GBA VC titles, but can be found empty within GBA VC titles. The NCCH ExeFS contains the same files as a normal application. The ExeFS:/.code contains the GBA VC ROM followed by a 0x360 byte long footer.

Footer

All values in the GBA VC footer and related structures are little-endian.

START SIZE DESCRIPTION
0x00 0x4 Magic '.CAA'
0x04 0x4 Must be 1
0x08 0x4 Offset to array of config descriptors
0x0C 0x4 Number of config descriptors << 4

Config descriptor

START SIZE DESCRIPTION
0x0 0x4 If 1, then this config descriptor is used. If 0, and the following value is not 0, then the GBA VC load fails outright (causes result 0xC900464F). Otherwise, this config descriptor is skipped.
0x4 0x4 Offset to config
0x8 0x4 Size of config (unused by the function that parses this, which hardcodes the config size (0x324) to memcpy)
0xC 0x4 Padding

Config

START SIZE DESCRIPTION
0x004 0x4 GBA ROM Filesize
0x008 0x4 Save type (see below)
0x020 0x4 LCD ghosting (01-FF, lower values equal more ghosting)
0x024 0x300 Video LUT (black to full, rgbrgbrgb...)?,
three different types of this data have been observed.

Save types:

  • 0x0: EEPROM 8k for < 256 Mbit games
  • 0x1: EEPROM 8k for 256 Mbit games
  • 0x2: EEPROM 64k for < 256 Mbit games
  • 0x3: EEPROM 64k for 256 Mbit games
  • 0x4: Flash 512k (Atmel, ID: 0x3D1F) + RTC
  • 0x5: Flash 512k (Atmel, ID: 0x3D1F)
  • 0x6: Flash 512k (SST, ID: 0xD4BF) + RTC
  • 0x7: Flash 512k (SST, ID: 0xD4BF)
  • 0x8: Flash 512k (Panasonic, ID: 0x1B32) + RTC
  • 0x9: Flash 512k (Panasonic, ID: 0x1B32)
  • 0xA: Flash 1Mbit (Macronix, ID: 0x09C2) + RTC
  • 0xB: Flash 1Mbit (Macronix, ID: 0x09C2)
  • 0xC: Flash 1Mbit (Sanyo, ID: 0x1362) + RTC
  • 0xD: Flash 1Mbit (Sanyo, ID: 0x1362)
  • 0xE: SRAM/FRAM 256k

Everything above 0xE results in no save chip and nothing being saved to NAND.

NAND Savegame

AGB_FIRM saves its active save memory to NAND on exit, this is then immediately picked up by NATIVE_FIRM on reboot by checking CFG_BOOTENV. From there, this is verified and copied out to SD (also see below). The savegame format is as follows:

START SIZE DESCRIPTION
0x0 0x4 Magic ('.SAV')
0x4 0xC Always 0xFF
0x10 0x10 AES-CMAC of the SHA256 hash of 0x30..0x200 + the entire save itself, keyslot 0x24, keyY from process9 .rodata
0x20 0x10 Always 0xFF
0x30 0x4 Always 0x1
0x34 0x4 Number of times saved (unused?)
0x38 0x8 AGB TitleID
0x40 0x10 SD card CID from the console the save was made on (verified on load)
0x50 0x4 Save start addr (always 0x200)
0x54 0x4 Save size
0x58 0x8 Always 0xFF (?)
0x60 0x4 See here
0x64 0x4 See here
0x68 0x198 Always 0xFF

NAND Savegame on SD

A NAND savegame copied to the SD by process9 is identical to its counterpart on the NAND partition, save for the CMAC. For SD copies on retail units, the CMAC is recalculated as the AES-CMAC of the (SHA256 hash of ("CTR-SIGN" + AGB TitleID (little endian) + SHA256 hash of ("CTR-SAV0" + SHA256 hash of (0x30..0x200 + the entire save itself)))), using keyslot 0x30 set up with the keyY from movable.sed. For SD copies on devkit units, the CMAC is recalculated using the SHA256 hash of 0x30..0x200 + the entire save itself, using a different key from process9 .rodata.