3dbrew

Changes

CONFIG9 Registers (edit)

Revision as of 00:14, 3 May 2023

1,824 bytes added ,  00:14, 3 May 2023
Add info on cart power supply bits
Line 8: Line 8:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_SYSPROT9|CFG_SYSPROT9]]
+
| [[#CFG9_SYSPROT9|CFG9_SYSPROT9]]
 
| 0x10000000
 
| 0x10000000
 
| 1
 
| 1
Line 14: Line 14:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_SYSPROT11|CFG_SYSPROT11]]
+
| [[#CFG9_SYSPROT11|CFG9_SYSPROT11]]
 
| 0x10000001
 
| 0x10000001
 
| 1
 
| 1
Line 20: Line 20:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_RST11|CFG_RST11]]
+
| [[#CFG9_RST11|CFG9_RST11]]
 
| 0x10000002
 
| 0x10000002
 
| 1
 
| 1
Line 26: Line 26:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| CFG_DEBUGUNIT
+
| CFG9_DEBUGCTL
 
| 0x10000004
 
| 0x10000004
 
| 4
 
| 4
Line 32: Line 32:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| ?
+
| [[#CFG9_XDMA_CNT|CFG9_XDMA_CNT]]
 
| 0x10000008
 
| 0x10000008
 
| 1
 
| 1
−
| TwlProcess9
+
| Boot9, Process9, TwlProcess9
 
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_CARDCONF|CFG_CARDCONF]]
+
| [[#CFG9_CARDCTL|CFG9_CARDCTL]]
 
| 0x1000000C
 
| 0x1000000C
 
| 2
 
| 2
−
|
+
| Process9
 
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
|  
+
| [[#CFG9_CARDSTATUS|CFG9_CARDSTATUS]]
 
| 0x10000010
 
| 0x10000010
 
| 1
 
| 1
−
|
+
| Process9
 
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| ?
+
| CFG9_CARDCYCLES0
−
| 0x10000011
  −
| 1
  −
|
  −
|-
  −
| style="background: green" | Yes
  −
| ?
   
| 0x10000012
 
| 0x10000012
 
| 2
 
| 2
−
|
+
| Boot9, Process9
 
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| ?
+
| CFG9_CARDCYCLES1
 
| 0x10000014
 
| 0x10000014
 
| 2
 
| 2
−
|
+
| Boot9, Process9
 
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| ?
+
| [[#CFG9_SDMMCCTL|CFG9_SDMMCCTL]]
 
| 0x10000020
 
| 0x10000020
 
| 2
 
| 2
−
|
+
| Process9
 
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
Line 80: Line 74:  
|-
 
|-
 
| style="background: red" | No
 
| style="background: red" | No
−
| [[#CFG_EXTMEMCNT9|CFG_EXTMEMCNT9]]
+
| [[#CFG9_EXTMEMCNT9|CFG9_EXTMEMCNT9]]
 
| 0x10000200
 
| 0x10000200
 
| 1
 
| 1
Line 86: Line 80:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_MPCORECFG|CFG_MPCORECFG]]
+
| [[#CFG9_MPCORECFG|CFG9_MPCORECFG]]
 
| 0x10000FFC
 
| 0x10000FFC
 
| 4
 
| 4
Line 92: Line 86:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_BOOTENV|CFG_BOOTENV]]
+
| [[#CFG9_BOOTENV|CFG9_BOOTENV]]
 
| 0x10010000
 
| 0x10010000
 
| 4
 
| 4
Line 98: Line 92:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_UNITINFO|CFG_UNITINFO]]
+
| [[#CFG9_UNITINFO|CFG9_UNITINFO]]
 
| 0x10010010
 
| 0x10010010
 
| 1
 
| 1
Line 104: Line 98:  
|-
 
|-
 
| style="background: green" | Yes
 
| style="background: green" | Yes
−
| [[#CFG_TWLUNITINFO|CFG_TWLUNITINFO]]
+
| [[#CFG9_TWLUNITINFO|CFG9_TWLUNITINFO]]
 
| 0x10010014
 
| 0x10010014
 
| 1
 
| 1
Line 110: Line 104:  
|}
 
|}
   −
== CFG_SYSPROT9 ==  
+
== CFG9_SYSPROT9 ==
−
CFG_SYSPROT9 is used to permanently disable certain security-sensitive ARM9 memory areas until the next hard reset.
+
CFG9_SYSPROT9 is used to permanently disable certain security-sensitive ARM9 memory areas until the next hard reset.
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 119: Line 113:  
|-
 
|-
 
| 0
 
| 0
−
| Disables ARM9 [[Memory_layout|bootrom]](+0x8000) when set to 1. Cannot be cleared to 0 once set to 1.
+
| Disables ARM9 [[Memory_layout|bootrom]](+0x8000) when set to 1, and enables access to [[Memory_layout|FCRAM]]. Cannot be cleared to 0 once set to 1.
 
| Boot9
 
| Boot9
 
|-
 
|-
Line 131: Line 125:  
|}
 
|}
   −
On Old 3DS, NATIVE_FIRM reads CFG_SYSPROT9 to know whether it has previously initialized the TWL console-unique keys using the OTP data.  After setting the TWL console-unique keys, NATIVE_FIRM sets CFG_SYSPROT9 bit 1 to disable the OTP area.  In subsequent FIRM launches prior to the next reset, NATIVE_FIRM will see that the OTP area is disabled, and skip this step.
+
On Old 3DS, NATIVE_FIRM reads CFG9_SYSPROT9 to know whether it has previously initialized the TWL console-unique keys using the OTP data.  After setting the TWL console-unique keys, NATIVE_FIRM sets CFG9_SYSPROT9 bit 1 to disable the OTP area.  In subsequent FIRM launches prior to the next reset, NATIVE_FIRM will see that the OTP area is disabled, and skip this step.
    
On New 3DS, the above is instead done by the [[FIRM#New_3DS_FIRM|Kernel9 loader]].  In addition to using the OTP data for initializing the TWL console-unique keys, the Kernel9 loader will generate the decryption key for NATIVE_FIRM.  The final keyslot for NATIVE_FIRM is preserved, so that at a non-reset FIRM launch, the keyslot can be reused, since the OTP would then be inaccessible.
 
On New 3DS, the above is instead done by the [[FIRM#New_3DS_FIRM|Kernel9 loader]].  In addition to using the OTP data for initializing the TWL console-unique keys, the Kernel9 loader will generate the decryption key for NATIVE_FIRM.  The final keyslot for NATIVE_FIRM is preserved, so that at a non-reset FIRM launch, the keyslot can be reused, since the OTP would then be inaccessible.
   −
It is not possible to set any other bits.
+
== CFG9_SYSPROT11 ==
−
 
  −
== CFG_SYSPROT11 ==  
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 145: Line 137:  
|-
 
|-
 
| 0
 
| 0
−
| Disables ARM11 [[Memory_layout|bootrom]](+0x8000) when set to 1. Cannot be cleared to 0 once set to 1.
+
| Disables ARM11 [[Memory_layout|bootrom]](+0x8000) when set to 1, and enables access to [[Memory_layout|FCRAM]]. Cannot be cleared to 0 once set to 1.
 
| Boot9
 
| Boot9
 
|-
 
|-
Line 153: Line 145:  
|}
 
|}
   −
== CFG_RST11 ==  
+
== CFG9_RST11 ==
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 169: Line 161:  
|}
 
|}
   −
== CFG_CARDCONF ==
+
== CFG9_XDMA_CNT ==
 +
 
 +
Write 1 to enable XDMA for the device, 0 to disable. Always enabled for CTRCARD (ids 0 and 1), NTRCARD (id 8), and SHA (id 6 for infifo and 7 for outfifo).
 +
 
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
!  Bit
 
!  Bit
 
!  Description
 
!  Description
 +
!  Used by
 +
|-
 +
| 0
 +
| SDIO controller 1 (eMMC and usually SD card; XDMA device ID: 2)
 +
|
 +
|-
 +
| 1
 +
| SDIO controller 3 (SD card if configured so; ID: 3)
 +
|
 +
|-
 +
| 2
 +
| AES Input FIFO (ID: 4)
 +
| Boot9, Process9, TwlProcess9
 +
|-
 +
| 3
 +
| AES Output FIFO (ID: 5)
 +
| Boot9, Process9, TwlProcess9
 +
|-
 +
| 31-4
 +
| Reserved
 +
|
 +
|}
 +
 +
== CFG9_CARDCTL ==
 +
{| class="wikitable" border="1"
 +
!  Bit
 +
!  Description
 +
!  Used by
 
|-
 
|-
 
| 1-0
 
| 1-0
−
| Gamecard active controller select (0=NTRCARD, 1=?, 2=CTRCARD1, 3=CTRCARD2)
+
| Gamecard active controller select (0=NTRCARD, 1=?, 2=CTRCARD0, 3=CTRCARD1)
 +
| Process9
 
|-
 
|-
 
| 8
 
| 8
−
| ?
+
| 1 = Switch to [[SPICARD_Registers|SPICARD]] interface (savegames).
 +
| Process9
 
|}
 
|}
    
Depending on the gamecard controller that has been selected, one of the following gamecard registers will become active:
 
Depending on the gamecard controller that has been selected, one of the following gamecard registers will become active:
 
* Selecting NTRCARD will activate the register space at [[NTRCARD|0x10164000]].
 
* Selecting NTRCARD will activate the register space at [[NTRCARD|0x10164000]].
−
* Selecting CTRCARD1 will activate the register space at [[CTRCARD|0x10004000]].
+
* Selecting CTRCARD0 will activate the register space at [[CTRCARD|0x10004000]].
−
* Selecting CTRCARD2 will activate the register space at [[CTRCARD|0x10005000]].
+
* Selecting CTRCARD1 will activate the register space at [[CTRCARD|0x10005000]].
 +
 
 +
== CFG9_CARDSTATUS ==
 +
{| class="wikitable" border="1"
 +
!  Bit
 +
!  Description
 +
!  Used by
 +
|-
 +
| 0
 +
| Cartridge-slot empty (0=inserted, 1=empty)
 +
| Process9
 +
|-
 +
| 3-2
 +
| Cartridge-slot power supply (0=off, 1=prepare power regulator, 2=enable output, 3=request power down)
 +
| Process9
 +
|}
   −
== 0x10000010 ==
+
When the power supply is in the "request power down" state, the power bits will be reset to 0=off after some time.
−
When a gamecard isn't inserted, this register value is 0x01.
     −
== CFG_EXTMEMCNT9 ==
+
== CFG9_SDMMCCTL ==
−
This register is New3DS-only. Only bit0 is writable: 0 = disable New3DS ARM9 memory at 0x08100000 size 0x80000, 1 = enable.
+
This register controls power of multiple ports/controllers and allows to map controller 3 to ARM9 or ARM11. The SD card can be accessed on ARM11 by setting bit 8 and clearing bit 9.
   −
This bit is set by New3DS ARM9-kernel crt0.
+
{| class="wikitable" border="1"
 +
!  Bit
 +
!  Description
 +
!  Used by
 +
|-
 +
| 0
 +
| Controller 1/3 port 0 power (SD card) (1=off)
 +
| Process9
 +
|-
 +
| 1
 +
| Controller 1 port 1 power (eMMC) (1=off)
 +
| Process9
 +
|-
 +
| 2
 +
| Controller 2 port 0 power (WiFi SDIO) (1=off)
 +
| Process9
 +
|-
 +
| 3
 +
| Controller 3 port 1 power? Set at cold boot.
 +
| -
 +
|-
 +
| 4-5
 +
| Unused.
 +
| -
 +
|-
 +
| 6
 +
| Wifi port related? Pull up? Set at cold boot.
 +
| -
 +
|-
 +
| 8
 +
| Controller 3 mapping (0=ARM9 0x10007000, 1=ARM11 0x10100000)
 +
| Process9
 +
|-
 +
| 9
 +
| SD card controller select (0=0x10007000/0x10100000, 1=0x10006000)
 +
| Process9
 +
|-
 +
| 10-15
 +
| Unused.
 +
| -
 +
|}
   −
The data in this extended memory doesn't change when disabling the memory, then re-enabling the memory. Reading this extended memory while disabled results in zeros.
+
== CFG9_EXTMEMCNT9 ==
 +
This register is New3DS-only.
 +
 
 +
{| class="wikitable" border="1"
 +
!  Bit
 +
!  Description
 +
!  Used by
 +
|-
 +
| 0
 +
| Hide extended ARM9 memory (0=hidden, 1=shown)
 +
| Kernel9 (New3DS)
 +
|-
 +
| 31-1
 +
| Reserved
 +
|
 +
|}
   −
== CFG_MPCORECFG ==
+
== CFG9_MPCORECFG ==
 
Identical to [[PDN#PDN_MPCORE_CFG|PDN_MPCORE_CFG]].
 
Identical to [[PDN#PDN_MPCORE_CFG|PDN_MPCORE_CFG]].
   −
== CFG_BOOTENV ==
+
== CFG9_BOOTENV ==
 
This register is used to determine what the previous running FIRM was. Its value is kept following an MCU reboot. Its initial value (on a cold boot) is 0. NATIVE_FIRM [[Development_Services_PXI|sets it to 1]] on shutdown/FIRM launch. [[Legacy_FIRM_PXI|LGY FIRM]] writes value 3 here when launching a TWL title, and writes value 7 when launching an AGB title.
 
This register is used to determine what the previous running FIRM was. Its value is kept following an MCU reboot. Its initial value (on a cold boot) is 0. NATIVE_FIRM [[Development_Services_PXI|sets it to 1]] on shutdown/FIRM launch. [[Legacy_FIRM_PXI|LGY FIRM]] writes value 3 here when launching a TWL title, and writes value 7 when launching an AGB title.
    
NATIVE_FIRM will only launch titles if this is not value 0, and will only save the [[Flash_Filesystem|AGB_FIRM savegame]] to SD if this is value 7.
 
NATIVE_FIRM will only launch titles if this is not value 0, and will only save the [[Flash_Filesystem|AGB_FIRM savegame]] to SD if this is value 7.
   −
== CFG_UNITINFO ==
+
== CFG9_UNITINFO ==
 
This 8-bit register is value zero for retail, non-zero for dev/debug units.
 
This 8-bit register is value zero for retail, non-zero for dev/debug units.
   −
== CFG_TWLUNITINFO ==
+
== CFG9_TWLUNITINFO ==
 
In the console-unique TWL key-init/etc function the ARM9 copies the u8 value from REG_UNITINFO to this register.
 
In the console-unique TWL key-init/etc function the ARM9 copies the u8 value from REG_UNITINFO to this register.
    
This is also used by TWL_FIRM Process9.
 
This is also used by TWL_FIRM Process9.
ElementW
20

edits

Retrieved from "https://www.3dbrew.org/wiki/Special:MobileDiff/19135...22213"