68
edits
Changes
Jump to navigation
Jump to search
Line 251:
Line 251: − + − + − + − + + + + + − + Line 373:
Line 377: − + − + − + Line 411:
Line 415: − + Line 423:
Line 427: − + Line 440:
Line 444: − + − + Line 453:
Line 457: − + − + − Unknown.+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
| 0xC
| 0xC
| 2
| 2
| Left volume
| Left channel volume
|-
|-
| 0xE
| 0xE
| 2
| 2
| Right volume
| Right channel volume
|-
|-
| 0x10
| 0x10
| 0x10
| 2
| Usually zero?
| Left capture volume
|-
| 0x12
| 2
| Right capture volume
|}
|}
This sets the playback volumes for the specified channel. This command must be used after command 0x8(user processes use cmd8 a second time before using this command). The parameter values seem to have no affect when not using IMA-ADPCM encoding?
This sets the playback and capture volumes for the specified channel. This command is usually used after command 0x8(user processes use cmd8 a second time before using this command).
==Command 0xA==
==Command 0xA==
| 0x8
| 0x8
| 4
| 4
| See below.
| See below. (Flags + Timer)
|-
|-
| 0xC
| 0xC
| 4
| 4
| See below.
| See below. (Channel volume)
|-
|-
| 0x10
| 0x10
| 4
| 4
| See below. Usually zero?
| See below. (Capture volume)
|-
|-
| 0x14
| 0x14
|-
|-
| 9-7
| 9-7
| ?
| Ignored
|-
|-
| 11-10
| 11-10
|-
|-
| 15
| 15
| ?
| Ignored
|-
|-
| 31-16
| 31-16
|-
|-
| 15-0
| 15-0
| Left volume, this value is clamped to the following range(by the user process): 0x0-0x8000.
| Left channel volume, this value is clamped to the following range(by the user process): 0x0-0x8000.
|-
|-
| 31-16
| 31-16
| Right volume, this value is clamped to the following range(by the user process): 0x0-0x8000.
| Right channel volume, this value is clamped to the following range(by the user process): 0x0-0x8000.
|}
|}
|-
|-
| 15-0
| 15-0
| Unknown, this value is clamped to the following range(by the user process): 0x0-0x8000.
| Left capture volume, this value is clamped to the following range(by the user process): 0x0-0x8000.
|-
|-
| 31-16
| 31-16
| Unknown, this value is clamped to the following range(by the user process): 0x0-0x8000.
| Right capture volume, this value is clamped to the following range(by the user process): 0x0-0x8000.
|}
|}
==Command 0xF==
==Command 0xF==
{| class="wikitable" border="1"
|-
! Index Byte
! Size
! Description
|-
| 0x2
| 2
| CmdID 0xF
|-
| 0x8
| 4
| Flags, as in command 0xE. Only the timer and the start/stop (bit14) bits are used.
|-
| 0xC
| 4
| Channel volume, same as in command 0xE.
|-
| 0x10
| 4
| Capture volume, same as in command 0xE.
|-
| 0x14
| 4
| Duty (see command 0x7).
|}
This channel is similar to command 0xE, but it is tailored for configuring PSG Tone channels (8, 9, 10, 11, 12, 13) as it contains a duty parameter. Channel format is set to PSG.
==Command 0x10==
{| class="wikitable" border="1"
|-
! Index Byte
! Size
! Description
|-
| 0x2
| 2
| CmdID 0xF
|-
| 0x8
| 4
| Flags, as in command 0xE. Only the timer and the start/stop (bit14) bits are used. Channel format is set to PSG.
|-
| 0xC
| 4
| Channel volume, same as in command 0xE.
|-
| 0x10
| 4
| Capture volume, same as in command 0xE.
|}
This channel is identical to command 0xF except for not having a duty parameter. Presumably used to configure PSG Noise channels (14, 15).
==Command 0x100==
==Command 0x100==