Gamecard Services PXI
Jump to navigation
Jump to search
"pxi:dev" service
| Command Header | Available since system version | Description |
|---|---|---|
| 0x000101C2 | 1.0.0-0 | ReadCTRCARD_Cmd40 |
| 0x000201C2 | 1.0.0-0 | WriteCTRCARD_Cmd41 |
| 0x00030102 | 1.0.0-0 | ReadCTRCARD_Cmd42 |
| 0x00040102 | 1.0.0-0 | WriteCTRCARD_Cmd44 |
| 0x00050102 | 1.0.0-0 | Stubbed, only returns an error. |
| 0x00060102 | 1.0.0-0 | Stubbed, only returns an error. |
| 0x00070000 | 1.0.0-0 | Stubbed, only returns an error. |
| 0x00080000 | 2.0.0-2 | Initialization for the stuff used by the below commands. |
| 0x00090000 | 2.0.0-2 | Shutdown for the stuff used by the below commands. |
| 0x000A0000 | 2.0.0-2 | This writes 3 bytes to cmdreply[2], the SPICARD hw is used for this. |
| 0x000B0000 | 2.0.0-2 | This writes a max-size value to cmdreply[2]. |
| 0x000C0042 | 2.0.0-2 | (size, ((size<<8) | 4), outbufptr) This copies the data from some buffer(size is restricted to the maxsize value also used by command 0x000B0000) to the FCRAM outbuf, when certain flags are set correctly. |
| 0x000D0688 | 2.0.0-2 | SPICARD related, to use this the arm9-access-control bit for SPICARD must be set in one of the currently running ARM11 processes. |
| 0x000E0284 | 2.0.0-2 | SPICARD related, to use this the arm9-access-control bit for SPICARD must be set in one of the currently running ARM11 processes. |
| 0x000F0000 | 2.0.0-2 | This reads the 0x200-byte NCSD header from the gamecard. Then the u8 from ncsdhdr+0x18B(partitionflags[3]) is copied to cmdreply[2]. |