215
edits
Changes
Jump to navigation
Jump to search
Line 315:
Line 315: + − + − Needs confirmation (or some flags to enable).+ − |-+ − | 0x11+ − | s+ − | ro+ − | ?+ − |-+ − | 0x12+ − | s+ − | ro+ − | 0x40 if volume slider position changed+ − Needs confirmation (or some flags to enable).+ − |-+ − | 0x13+ − | s+ − | ro − | ? Line 357:
Line 356: + − + − |-+ − | 0x19+ − | s+ − | rw+ − | RTC interrupt mask − |- − | 0x1A − | s − | rw − | ? − |- − | 0x1B − | s − | rw − | ? Line 399:
Line 388: − + + + + + + + Line 409:
Line 404: − + + + + + + + Line 464:
Line 465: − + Line 492:
Line 493: + Line 512:
Line 514: − + Line 522:
Line 524: − + − + Line 627:
Line 629: − + − + − +
add new registers and adjust readibility for some parts
|-
|-
| 0x10
| 0x10
- 0x13
| s
| s
| ro
| ro
| Special HID status flags: bit0 = power button pressed, bit1 = power button pressed long, bit2 = home button pressed, bit3 = home button released, bit4 = wifi slider enabled, bit5 = shell got closed, bit6 = shell got opened. If nothing has changed this register is 0.
| Special HID status flags:
bit00: power button pressed
bit01: power button pressed long
bit02: home button pressed
bit03: home button released
bit04: wifi slider pressed
bit05: shell got closed
bit06: shell got opened
bit07: ???, sends srv notification 0x20C
bit08: charger plugged in
bit09: charger plugged out
bit11: ???, signals an event
bit14: ???, sends srv notification 0x210
bit15: ???, sends srv notification 0x20F
bit22: volume slider position changed
If nothing has changed this register is 0
|-
|-
| 0x14
| 0x14
|-
|-
| 0x18
| 0x18
- 0x1B
| s
| s
| rw
| rw
| ?
| Interrupt mask (0=enabled,1=disabled)
bit11: ??? (HID related)
bit12: Accelerometer update
bit30: forced off my mcu sysmodule
bit31: forced off my mcu sysmodule
|-
|-
| 0x1C
| 0x1C
| s
| s
| wo
| wo
| System power control - bit0 = power off, bit1 = reboot (unused?). bit2 = reboot (used by mcu-module and LgyBg). bit3 = used by LgyBg to power off, causes hangs in 3DS-mode. bit4 = doesn't seem to do anything, but an mcu::RTC command uses this. Other bits are unused, and seem to do nothing.
| System power control:
bit0: power off
bit1: reboot (unused?)
bit2: reboot (used by mcu sysmodule and LgyBg)
bit3: used by LgyBg to power off, causes hangs in 3DS-mode
bit4: doesn't seem to do anything, but an mcu::RTC command uses this
Other bits are unused, and seem to do nothing.
|-
|-
| 0x21
| 0x21
| s
| s
| wo
| wo
| Used to set LCD states. bit0 = don't push to LCDs, bit1 = push to LCDs, bit2 = bottom screen backlight off, bit3 = bottom screen backlight on, bit4 = top screen backlight off, bit5 = top screen backlight on
| Used to set LCD states
bit0: don't push to LCDs
bit1: push to LCDs
bit2: bottom screen backlight off
bit3: bottom screen backlight on
bit4: top screen backlight off
bit5: top screen backlight on
|-
|-
| 0x23
| 0x23
| 0x64
| 0x64
| wo
| wo
| This is used for [[MCURTC:SetInfoLEDPattern|controlling]] the notification LED (see [[MCURTC:SetInfoLEDPatternHeader]] as well), when this register is written. It's possible to write data here with size less than 0x64, and only that portion of the pattern data will get overwritten. Reading from this register only returns zeroes, so it's considered write-only.
| This is used for [[MCURTC:SetInfoLEDPattern|controlling]] the notification LED (see [[MCURTC:SetInfoLEDPatternHeader]] as well), when this register is written. It's possible to write data here with size less than 0x64, and only that portion of the pattern data will get overwritten. Reading from this register only returns zeroes, so it's considered write-only. Writing past the size of this register seems to do nothing.
|-
|-
| 0x2E
| 0x2E
| rw
| rw
| RTC alarm registers
| RTC alarm registers
Register 0x3B could be used to upload [[MCU_Services#MCU_firmware_versions|MCU firmware]] if some conditions are met.
|-
|-
| 0x3D
| 0x3D
| s
| s
| rw
| rw
| ?
| Index selector for register 0x44
|-
|-
| 0x42
| 0x42
| s
| s
| rw
| rw
| ?
| ???, accelometer related
|-
|-
| 0x44
| 0x44
| s
| s
| rw
| rw
| ? (setting this seems to freeze the system for a second)
| ???, accelometer related
|-
|-
| 0x45
| 0x45
byte 09: system model (see [[Cfg:GetSystemModel#System_Model_Values|Cfg:GetSystemModel]] for values)
byte 09: system model (see [[Cfg:GetSystemModel#System_Model_Values|Cfg:GetSystemModel]] for values)
byte 10: power LED related? 0 is off, 1 is red
byte 10: power LED related? 0 is off, 1 is red
byte 13: RGB LED red factor
byte 13: RGB LED red intensity
byte 14: RGB LED green factor
byte 14: RGB LED green intensity
byte 15: RGB LED blue factor
byte 15: RGB LED blue intensity
byte 17: WiFi LED brightness
byte 17: WiFi LED brightness
byte 18: raw button states?
byte 18: raw button states?