I2C Services

From 3dbrew
Revision as of 07:14, 14 April 2015 by Yellows8 (talk | contribs) (I2C Service)
Jump to: navigation, search

I2C Service Names

Service names Notes Accessible deviceIDs
"i2c::MCU" 0, 3
"i2c::CAM" 1, 2, 4
"i2c::LCD" 5, 6
"i2c::DEB" 7, 8
"i2c::HID" 9, 10, 11, 12
"i2c::IR" 13, and additionally for New3DS i2c module: 17
"i2c::EEP" 14
"i2c::NFC" Only available via the New3DS i2c sysmodule. 15
"i2c::QTM" Only available via the New3DS i2c sysmodule. 16

Each I2C service can only access certain I2C device(s). When the specified deviceid isn't accessible, error 0xE0A02FEA is returned.

I2C Service

Command Header Available since system-version Description
0x00010100 SetRegisterBits8 (u8 devid, u8 regid, u8 regdata, u8 mask)
0x0002.... EnableRegisterBits8 (u8 devid, u8 regid, u8 enablemask)
0x000300C0 DisableRegisterBits8 (u8 devid, u8 regid, u8 disablemask)
0x00040102 MultiSetRegisterBits16 (u16 regid, u16 regdata, u16 mask, devcount, u8* devidlistptr)
0x0005.... WriteRegister8 (u8 devid, u8 regid, u8 regdata)
0x0006.... WriteCommand8 (u8 devid, u8 cmdid)
0x0007.... WriteRegister16 (u8 devid, u16 regid, u16 regdata)
0x000800C2 MultiWriteRegister16 (u16 regid, u16 regdata, devcount, u8* devidlistptr)
0x0009.... u8 ReadRegister8 (u8 devid, u8 regid)
0x000A.... u16 ReadRegister16 (u8 devid, u16 regid)
0x000B00C2 WriteRegisterBuffer8 (u8 devid, u8 regid, buffersize, (buffersize << 14) | 0x402, u8* bufferptr)
0x000C00C2 WriteRegisterBuffer16 (u8 devid, u16 regid, buffersize, (buffersize << 15) | 0x402, u16* bufferptr)
0x000D00C0 ReadRegisterBuffer8 (u8 devid, u8 regid, buffersize, +0x180: (buffersize << 14) | 2, +0x184: u8 bufferptr)
0x000E00C2 WriteRegisterBuffer8_again? (u8 devid, u8 regid, buffersize, u8* bufferptr)
0x000F....
0x0010....
0x001100C2 ReadRegisterBuffer(u8 devid, u16 regid, buffersize, u8 *buff)
0x001200C2 WriteRegisterBuffer(u8 devid, u16 regid, buffersize, u8 *buff)
0x00130040 8.0.0-18 ReadDeviceRaw8(u8 devid) Writes the output read u8 I2C data to cmdreply[2]. After successfully selecting the I2C device, it writes 0xE1 to CNT then loads the output u8 I2C data from the DATA register.
0x00140082 8.0.0-18 WriteDeviceRaw(u8 devid, u32 buffersize, (buffersize << 14) | 0x402, bufferptr) This is basically the write-data version of command 0x00150080.
0x00150080 8.0.0-18 ReadDeviceRaw(u8 devid, u32 buffersize, +0x180: (buffersize << 14) | 2, +0x184: bufferptr) This is the >1-byte version of command 0x00130040, except value 0xF0 is used for CNT instead of 0xE1.

Commands 0x00130040..0x00150080 are only usable with the New3DS i2c module: on Old3DS the actual command-handler function for each of these commands just return an error.