LCD Registers

Revision as of 07:13, 18 December 2012 by Shiz (talk | contribs) (Fixed unknown bit range.)

Registers

NAME PHYSICAL ADDRESS PROCESS VIRTUAL ADDRESS KERNEL VIRTUAL ADDRESS WIDTH
REG_LCDCOLORFILLMAIN 0x10202204 0x1ED02204 0xFFFD6204 4
REG_LCDCOLORFILLSUB 0x10202A04 0x1ED02A04 0xFFFD6A04 4

REG_*MAIN registers are used for the top LCD, while SUB is used for the bottom LCD.

REG_LCDCOLORFILL

Bit Description
7-0 Red component intensity
15-8 Green component intensity
23-16 Blue component intensity
24 Enable
31-25 ?

When the enable bit is set, the specified solid color is displayed on the LCD instead of the rendered graphics.