SVC

SVC List

Id	Description
0x1	ControlMemory(unsigned int *OutAddr, unsigned int Addr0, unsigned int Addr1, unsigned int Size, unsigned int MemoryType, unsigned int Permissions) (OutAddr is usually the same as the input Addr0)
0x2	QueryMemory(MemInfo *Info, unsigned int *Out, unsigned int Addr)
0x3	ExitProcess()
0x4	GetProcessAffinityMask
0x5	SetProcessAffinityMask
0x6	GetProcessIdealProcessor(unsigned int *IdealProcessor, Handle KProcess)
0x7	SetProcessIdealProcessor(Handle KProcess, unsigned int IdealProcessor)
0x8	CreateThread(Handle*, Entrypoint, Entrypoint_Param, StackTop, ThreadPriority, ResLimit)
0x9	ExitThread(void)
0xA	SleepThread(s64 nanoseconds)
0xB	GetThreadPriority(s32* priority, handle thread)
0xC	SetThreadPriority(handle thread, s32 priority)
0xD	GetThreadAffinityMask(u8* affinitymask, handle thread, s32 processorcount)
0xE	SetThreadAffinityMask(handle thread, u8* affinitymask, s32 processorcount)
0xF	GetThreadIdealProcessor
0x10	SetThreadIdealProcessor
0x11	GetCurrentProcessorNumber
0x12	Run(Handle KProcess, unsigned int *buf) (This starts the main() thread. Buf+0 is main-thread priority, Buf+4 is main-thread stack-size.)
0x13	CreateMutex
0x14	ReleaseMutex(Handle KMutex)
0x15	CreateSemaphore
0x16	ReleaseSemaphore
0x17	CreateEvent(Handle *KEvent, unsigned char Unk)
0x18	SignalEvent(Handle KEvent)
0x19	ClearEvent
0x1A	CreateTimer
0x1B	SetTimer
0x1C	CancelTimer
0x1D	ClearTimer
0x1E	CreateMemoryBlock
0x1F	MapMemoryBlock(Handle, unsigned int Addr, unsigned int Permissions, unsigned int Unk)
0x20	UnmapMemoryBlock
0x21	CreateAddressArbiter
0x22	ArbitrateAddress
0x23	CloseHandle(Handle)
0x24	WaitSynchronization1
0x25	WaitSynchronization2
0x26	SignalAndWait
0x27	DuplicateHandle
0x28	GetSystemTick
0x29	GetHandleInfo
0x2A	GetSystemInfo(unsigned long long *Output, unsigned int Type0, unsigned int Type1)
0x2B	GetProcessInfo(unsigned long long *Output, Handle KProcess, unsigned int Type)
0x2C	GetThreadInfo
0x2D	ConnectToPort(Handle*, char *PortName)
0x2E	SendSyncRequest1 (Stubbed)
0x2F	SendSyncRequest2 (Stubbed)
0x30	SendSyncRequest3 (Stubbed)
0x31	SendSyncRequest4 (Stubbed)
0x32	SendSyncRequest(Handle)
0x33	OpenProcess(Handle *KProcess, unsigned int ProcessId)
0x34	OpenThread
0x35	GetProcessId(unsigned int *ProcessId, Handle KProcess)
0x36	GetProcessIdOfThread
0x37	GetThreadId
0x38	GetResourceLimit(Handle*, Handle KProcess)
0x39	GetResourceLimitLimitValues
0x3A	GetResourceLimitCurrentValues
0x3B	GetThreadContext (Stubbed)
0x3C	Break(BreakReason)
0x3D	OutputDebugString(void const, int) (Does nothing on non-debug units)
0x3E	ControlPerformanceCounter(unsigned long long, int, unsigned int, unsigned long long)
0x47	CreatePort
0x48	CreateSessionToPort
0x49	CreateSession
0x4A	AcceptSession
0x4B	ReplyAndReceive1 (Stubbed)
0x4C	ReplyAndReceive2 (Stubbed)
0x4D	ReplyAndReceive3 (Stubbed)
0x4E	ReplyAndReceive4 (Stubbed)
0x4F	ReplyAndReceive
0x50	BindInterrupt(Interrupt, Handle, int, bool)
0x51	UnbindInterrupt(Interrupt, Handle)
0x52	InvalidateProcessDataCache(Handle, void*, unsigned int)
0x53	StoreProcessDataCache(Handle process, void const* addr, unsigned int size)
0x54	FlushProcessDataCache(Handle, void const*, unsigned int)
0x55	StartInterProcessDma(Handle* out, Handle dstProcess, void* dst, Handle srcProcess, const void* src, size_t size, const DmaConfig& config )
0x56	StopDma(Handle)
0x57	GetDmaState(DmaState*, Handle)
0x58	RestartDma(nn::Handle, void *, void const*, unsigned int, signed char)
0x60	DebugActiveProcess(Handle *KDebug, unsigned int ProcessID)
0x61	BreakDebugProcess(Handle)
0x62	TerminateDebugProcess(Handle)
0x63	GetProcessDebugEvent(DebugEventInfo*, Handle)
0x64	ContinueDebugEvent(Handle, unsigned int)
0x65	GetProcessList(int *TotalPIDs, unsigned int *PIDs, int MaxPIDs)
0x66	GetThreadList(int*, unsigned int*, int, Handle)
0x67	GetDebugThreadContext(ThreadContext*, Handle, unsigned int, unsigned int)
0x68	SetDebugThreadContext(Handle, unsigned int, ThreadContext const&, unsigned int)
0x69	QueryDebugProcessMemory(MemoryInfo*, PageInfo*, Handle, unsigned int)
0x6A	ReadProcessMemory(void* Buffer, Handle KDebug, unsigned int ProcAddr, unsigned int Size)
0x6B	WriteProcessMemory(Handle KDebug, void const* Buffer, unsigned int ProcAddr, unsigned int Size)
0x6C	SetHardwareBreakPoint(int, unsigned int, unsigned int)
0x6D	GetDebugThreadParam(long long *, int *, nn::Handle, unsigned int, nn::dmnt::DebugThreadParam) (Disabled on regular kernel)
0x70	ControlProcessMemory(Handle KProcess, unsigned int Addr0, unsigned int Addr1, unsigned int Size, unsigned int Type, unsigned int Permissions)
0x71	MapProcessMemory(Handle KProcess, unsigned int StartAddr, unsigned int EndAddr)
0x72	UnmapProcessMemory(Handle KProcess, unsigned int StartAddr, unsigned int EndAddr)
0x73	?
0x74	Stubbed on regular kernel
0x75	?
0x76	TerminateProcess(Handle)
0x77	(Handle KProcess, Handle KResourceLimit)
0x78	CreateResourceLimit(Handle *KResourceLimit)
0x79	?
0x7A	DisableExecuteNever(unsigned int Addr, unsigned int Size) (Stubbed for regular kernel beginning with 2.0.0-2)
0x7C	KernelSetState(unsigned int Type, unsigned int Param0, unsigned int Param1, unsigned int Param2) (The Type determines the usage of each param)
0x7D	QueryProcessMemory(MemInfo *Info, unsigned int *Out, Handle KProcess, unsigned int Addr)
0xFF	Debug related (The Syscall access control mask doesn't apply for this SVC)

Processes

Each process can only use SVCs which are enabled in the exheader for this process. The ARM11 kernel SVC handler checks whether the SVC is enabled in the syscall access control mask stored on the SVC-mode stack, when the SVC isn't enabled a kernelpanic() is triggered. Each process has a separate SVC-mode stack, this stack and the syscall access mask stored here is initialized when the process is started. Applications normally only have access to SVCs <=0x3D, however not all SVCs <=0x3D are accessible to the application. The majority of the SVCs accessible to applications are unused by the application.

Each process has a separate handle-table, the size of this table is stored in the exheader. The handles in a handle-table can't be used in the context of other processes, since those handles don't exist in other handle-tables.

0xFFFF8001 is a handle alias for the current KProcess, and 0xFFFF8000 is a handle alias for the current KThread.

Calling svcBreak on retail will only terminate the process which called this SVC.

Threads

For svcCreateThread the input address used for Entrypoint_Param and StackTop are normally the same, however these can be arbitrary. For the main thread the Entrypoint_Param is value 0.

Using CloseHandle() with a KThread handle will terminate the specified thread.

Memory Mapping

ControlMemory and MapMemoryBlock can be used to map memory pages, these two SVCs only support mapping execute-never R/W pages. The input permissions parameter for these SVCs must be <=3, where value zero is used when un-mapping memory. Bitmask 0xf00 for ControlMemory parameter MemoryType is the memory-type, when this is zero the memory-type is loaded from the kernel flags stored in the exheader ARM11 kernel descriptors, for the process using the SVC. ControlMemory parameter MemoryType with value 0x10003 is used for mapping the GSP heap. The low 8-bits are the type: 1 is for un-mapping memory, 3 for mapping memory. Type4 is used to mirror the RW memory at Addr1, to Addr0. Type4 will return an error if Addr1 is located in read-only memory. Addr1 is not used for type1 and type3.

ControlProcessMemory maps memory in the specified process, this is the only SVC which allows mapping executable memory. Format of the permissions field for memory mapping SVCs: bit0=R, bit1=W, bit2=X. Type6 sets the Addr0 memory permissions to the input permissions, for already mapped memory.

MapProcessMemory maps RW memory starting at address 0x00100000 in the specified KProcess, at the specified StartAddr in the current process. MapProcessMemory then maps 0x08000000 in the specified process, to StartAddr+0x7f00000 in the current process. UnmapProcessMemory unmaps the memory which was mapped by MapProcessMemory.

Debugging

DebugActiveProcess is used to attach to a process for debugging. This SVC can only be used when the target process' ARM11 descriptors stored in the exheader have the kernel flag for "Enable debug" set. Otherwise when that flag is clear, the kernel flags for the process using this SVC must have the "Force debug" flag set.

KernelSetState

Type0 initializes the programID for launching FIRM, then triggers launching FIRM. Param0 and Param2 are unused. Param1 is the programID-low, and the programID-high is 0x00040138.

Type3 is used for initializing the 0x1000-byte buffer used by the launched FIRM. Param2 is unused. When Param0 is value 1, this buffer is copied to the beginning of FCRAM at 0xF0000000, and Param1 is unused. When Param0 is value 0, this kernel buffer is mapped to process address Param1.

GetSystemInfo

Type0 value 26(Type1 is unused) writes the total number of processes which were directly launched by the kernel, to Output. For the NATIVE_FIRM/SAFE_MODE_FIRM ARM11 kernel, this is normally 5, for processes sm, fs, pm, loader, and pxi.