FIRM: Difference between revisions

Line 84:

* [[9.6.0-24|9.6.0-X]]: Then it uses the above decrypted block from sector+0 to set the normalkey for keyslot 0x11. Decrypts a 0x10-byte block from arm9loader .(ro)data using keyslot 0x11 with AES-ECB, and initializes keyX for keyslot 0x18 with it(same block as previous versions).

* [[9.6.0-24|9.6.0-X]]: Starting with this version keyslot 0x16 keyX init was moved here, see below for details on this. The code for this is same as [[9.5.0-22|9.5.0-X]], except the decrypted normalkey from sector+0x10 is used for keyslot 0x11 instead.

* Initialises KeyX for keyslots 0x18..0x1F(0x19..0x1F with [[9.6.0-24|9.6.0-X]]) with the output of decrypting a 0x10-byte block with AES-ECB using keyslot 0x11. This block was changed to a new one separate from keyslot 0x18, starting with [[9.6.0-24|9.6.0-X]]. Before doing the crypto each time, the loader sets the normal-key for keyslot 0x11 to the plaintext normalkey from sector+0(+0x10 with [[9.6.0-24|9.6.0-X]]). This block sits 0xA0 before the end of the ARM9 binary(pre-[[9.6.0-24|9.6.0-X]]), and has a SHA-256 of 219DA61289A1D8A85F403A8BC6EBA635269D72FE592EF97DED1D4F7BBDC789E6. The last byte in this 0x10-byte input block is increased by 0x01 after initializing each keyslot. These are New3DS-specific keys.

* Initialises KeyX for keyslots 0x18..0x1F(0x19..0x1F with [[9.6.0-24|9.6.0-X]]) with the output of decrypting a 0x10-byte block with AES-ECB using keyslot 0x11. This block was changed to a new one separate from keyslot 0x18, starting with [[9.6.0-24|9.6.0-X]]. The last byte in this 0x10-byte input block is increased by 0x01 after initializing each keyslot. Before doing the crypto each time, the loader sets the normal-key for keyslot 0x11 to the plaintext normalkey from sector+0(+0x10 with [[9.6.0-24|9.6.0-X]]). These are New3DS-specific keys.

* [[9.5.0-22|9.5.0-X]](moved to above with [[9.6.0-24|9.6.0-X]]): Sets the normal-key for keyslot 0x11 to the same one already decrypted on the stack. Decrypts the 0x10-byte block at arm9binhdr+0x60 with AES-ECB using keyslot 0x11, then sets the keyX for keyslot 0x16 to the output data.

* [[9.5.0-22|9.5.0-X]]: The normalkey, keyX, and keyY, for keyslot 0x11 are then cleared to zero.

@@ Line 84: / Line 84: @@
 * [[9.6.0-24|9.6.0-X]]: Then it uses the above decrypted block from sector+0 to set the normalkey for keyslot 0x11. Decrypts a 0x10-byte block from arm9loader .(ro)data using keyslot 0x11 with AES-ECB, and initializes keyX for keyslot 0x18 with it(same block as previous versions).
 * [[9.6.0-24|9.6.0-X]]: Starting with this version keyslot 0x16 keyX init was moved here, see below for details on this. The code for this is same as  [[9.5.0-22|9.5.0-X]], except the decrypted normalkey from sector+0x10 is used for keyslot 0x11 instead.
-* Initialises KeyX for keyslots 0x18..0x1F(0x19..0x1F with [[9.6.0-24|9.6.0-X]]) with the output of decrypting a 0x10-byte block with AES-ECB using keyslot 0x11. This block was changed to a new one separate from keyslot 0x18, starting with [[9.6.0-24|9.6.0-X]]. Before doing the crypto each time, the loader sets the normal-key for keyslot 0x11 to the plaintext normalkey from sector+0(+0x10 with [[9.6.0-24|9.6.0-X]]). This block sits 0xA0 before the end of the ARM9 binary(pre-[[9.6.0-24|9.6.0-X]]), and has a SHA-256 of 219DA61289A1D8A85F403A8BC6EBA635269D72FE592EF97DED1D4F7BBDC789E6. The last byte in this 0x10-byte input block is increased by 0x01 after initializing each keyslot. These are New3DS-specific keys.
+* Initialises KeyX for keyslots 0x18..0x1F(0x19..0x1F with [[9.6.0-24|9.6.0-X]]) with the output of decrypting a 0x10-byte block with AES-ECB using keyslot 0x11. This block was changed to a new one separate from keyslot 0x18, starting with [[9.6.0-24|9.6.0-X]]. The last byte in this 0x10-byte input block is increased by 0x01 after initializing each keyslot. Before doing the crypto each time, the loader sets the normal-key for keyslot 0x11 to the plaintext normalkey from sector+0(+0x10 with [[9.6.0-24|9.6.0-X]]). These are New3DS-specific keys.
 * [[9.5.0-22|9.5.0-X]](moved to above with [[9.6.0-24|9.6.0-X]]): Sets the normal-key for keyslot 0x11 to the same one already decrypted on the stack. Decrypts the 0x10-byte block at arm9binhdr+0x60 with AES-ECB using keyslot 0x11, then sets the keyX for keyslot 0x16 to the output data.
 * [[9.5.0-22|9.5.0-X]]: The normalkey, keyX, and keyY, for keyslot 0x11 are then cleared to zero.