Difference between revisions of "Gamecard Services PXI"
Jump to navigation
Jump to search
Line 24: | Line 24: | ||
| 0x00050102 | | 0x00050102 | ||
| [[1.0.0-0]] | | [[1.0.0-0]] | ||
− | | Stubbed, only returns an error. | + | | WriteHostExStart. Stubbed, only returns an error. Use [[PXIDEV:WriteCTRCARD_Cmd44|WriteHostEx]] instead. |
|- | |- | ||
| 0x00060102 | | 0x00060102 | ||
| [[1.0.0-0]] | | [[1.0.0-0]] | ||
− | | Stubbed, only returns an error. | + | | WriteHostExChunk. Stubbed, only returns an error. Use [[PXIDEV:WriteCTRCARD_Cmd44|WriteHostEx]] instead. |
|- | |- | ||
| 0x00070000 | | 0x00070000 | ||
| [[1.0.0-0]] | | [[1.0.0-0]] | ||
− | | Stubbed, only returns an error. | + | | WriteHostExEnd. Stubbed, only returns an error. Use [[PXIDEV:WriteCTRCARD_Cmd44|WriteHostEx]] instead. |
|- | |- | ||
| 0x00080000 | | 0x00080000 | ||
Line 44: | Line 44: | ||
| 0x000A0000 | | 0x000A0000 | ||
| [[2.0.0-2]] | | [[2.0.0-2]] | ||
− | | This writes 3 bytes to cmdreply[2], the [[SPICARD]] hw is used for this. | + | | GetMIDIInfo. This writes 3 bytes to cmdreply[2], the [[SPICARD]] hw is used for this. |
|- | |- | ||
| 0x000B0000 | | 0x000B0000 | ||
| [[2.0.0-2]] | | [[2.0.0-2]] | ||
− | | This writes a max-size value to cmdreply[2]. | + | | GetMIDIBufferSize. This writes a max-size value to cmdreply[2]. |
|- | |- | ||
| 0x000C0042 | | 0x000C0042 |
Revision as of 21:51, 1 September 2017
"pxi:dev" service
Command Header | Available since system version | Description |
---|---|---|
0x000101C2 | 1.0.0-0 | ReadHostIO |
0x000201C2 | 1.0.0-0 | WriteHostIO |
0x00030102 | 1.0.0-0 | ReadHostEx |
0x00040102 | 1.0.0-0 | WriteHostEx |
0x00050102 | 1.0.0-0 | WriteHostExStart. Stubbed, only returns an error. Use WriteHostEx instead. |
0x00060102 | 1.0.0-0 | WriteHostExChunk. Stubbed, only returns an error. Use WriteHostEx instead. |
0x00070000 | 1.0.0-0 | WriteHostExEnd. Stubbed, only returns an error. Use WriteHostEx instead. |
0x00080000 | 2.0.0-2 | InitializeMIDI |
0x00090000 | 2.0.0-2 | FinalizeMIDI |
0x000A0000 | 2.0.0-2 | GetMIDIInfo. This writes 3 bytes to cmdreply[2], the SPICARD hw is used for this. |
0x000B0000 | 2.0.0-2 | GetMIDIBufferSize. This writes a max-size value to cmdreply[2]. |
0x000C0042 | 2.0.0-2 | ReadMIDI (size, ((size<<8) | 4), outbufptr) This copies the data from some buffer(size is restricted to the maxsize value also used by command 0x000B0000) to the FCRAM outbuf, when certain flags are set correctly. |
0x000D0688 | 2.0.0-2 | SPIMultiWriteRead |
0x000E0284 | 2.0.0-2 | SPIWriteRead |
0x000F0000 | 2.0.0-2 | GetCardDevice |
Types
SectorSize
Value | Description |
---|---|
0 | 0x0 bytes |
1 | 0x4 bytes |
2 | 0x10 bytes |
3 | 0x40 bytes |
4 | 0x200 bytes |
5 | 0x400 bytes |
6 | 0x800 bytes |
7 | 0x1000 bytes |
8 | 0x2000 bytes |
TransferOption
Bits | Description |
---|---|
0-5 | CardSpiBaudRate |
6-7 | CardSpiBusMode |
WaitOperation
Bits | Description |
---|---|
0-3 | WaitType |
4-7 | DeassertType |
8-63 | Nanoseconds |
WaitType
Value | Description |
---|---|
0 | None |
1 | Sleep |
2 | Wait for IREQ, return if timeout |
3 | Wait for IREQ, continue if timeout |
DeassertType
Value | Description |
---|---|
0 | None |
1 | Before wait |
2 | After wait |