I2C Registers: Difference between revisions

← Older edit Newer edit →

@@ Line 294: / Line 294: @@
 == Device 13 ==
+{| class="wikitable" border="1"
+!  Raw I2C register address
+!  Internal register address
+!  Width
+!  Description
+|-
+| 0x0
+| 0x0
+| 0x40
+| RHR / THR (data receive/send FIFO)
+|-
+| 0x18
+| 0x3
+| 0x1
+| LCR
+|}
-From the datasheet linked to [[Hardware|here]], for the structure of the I2C register address u8: "Bit 0 is not used, bits 2:1 select the channel, bits 6:3 select one of the UART internal registers. Bit 7 is not used with the I2C-bus interface, but it is used by the SPI interface to indicate a read or a write operation."
+See the datasheet linked to on the [[Hardware]] page for reference. From that datasheet, for the structure of the I2C register address u8: "Bit 0 is not used, bits 2:1 select the channel, bits 6:3 select one of the UART internal registers. Bit 7 is not used with the I2C-bus interface, but it is used by the SPI interface to indicate a read or a write operation."
 = I2CCNT =