6,264
edits
Changes
no edit summary
See the datasheet linked to on the [[Hardware]] page for reference. From that datasheet, for the structure of the I2C register address u8: "Bit 0 is not used, bits 2:1 select the channel, bits 6:3 select one of the UART internal registers. Bit 7 is not used with the I2C-bus interface, but it is used by the SPI interface to indicate a read or a write operation."
See the datasheet linked to on the [[Hardware]] page for reference. From that datasheet, for the structure of the I2C register address u8: "Bit 0 is not used, bits 2:1 select the channel, bits 6:3 select one of the UART internal registers. Bit 7 is not used with the I2C-bus interface, but it is used by the SPI interface to indicate a read or a write operation."
== Device 15 ==
This the New3DS [[NFC_Services|NFC]] controller "I2C" interface. This device is accessed via the WriteDeviceRaw/ReadDeviceRaw I2C service [[I2C_Services|commands]].
Since the *Raw commands are used with this, this device has no I2C registers. Instead, raw data is transfered after the I2C device is selected. Hence, WriteDeviceRaw is used for sending commands to the controller, while ReadDeviceRaw is for receiving responses from the controller.