NIM Services

From 3dbrew
Revision as of 23:07, 10 March 2016 by Yellows8 (talk | contribs)
Jump to navigation Jump to search

NIM user service "nim:u"

Command Header Description
0x00010000 Related to starting a sysupdate?
0x00020000 GetUpdateDownloadProgress
0x0003.... ?
0x00040000 FinishTitlesInstall
0x00050000 This obtains an event handle. Home Menu will check whether a system update is available when this event is triggered.
0x0006.... ?
0x0007.... ?
0x0008.... ?
0x00090000 CheckSysupdateAvailable
0x000A0000 GetState
0x000B0000 GetSystemTitleHash

NIM server service "nim:s"

Command Header Description
0x00060080 The input at cmdreq[1-2] is an u64 titleID. This writes an u8 to cmdreply[2]. It's unknown what exactly the eShop application uses this for, it only uses this command for apps which are installed(checked via AM probably). In those cases, it seems the outval for this command(with result-code=0) is normally 0?
0x000A0000 CheckSysupdateAvailableSOAP
0x0016020A ListTitles
0x002D0042 DownloadTickets
0x00420240 StartDownload

NIM server service "nim:aoc"

Command Header Description
0x00030042 SetApplicationId
0x00040042 SetTin
0x000902D0 ListContentSetsEx
0x00180000 GetBalance
0x001D0000 GetCustomerSupportCode
0x00210000 Initialize
0x00240282 CalculateContentsRequiredSize
0x00250000 RefreshServerTime

NIM service "nim:ndm"

kagiya server

The nim system module communicates with a server called kagiya (kagiya-ctr.cdn.nintendo.net or kagiya-dev-ctr.cdn.nintendo.net for development units). It provides the 9.6 crypto seed in binary form for any given title ID under (HTTPS) kagiya-ctr.cdn.nintendo.net/title/0x%16llx/ext_key?country=%s, where %16llx is the title ID and %s is a country code as used in the eShop.

New3DS

NIM module only uses CheckNew3DS for determining what heap sizes to use, in two functions. One is for the size of the 0x08000000 vmem heap, the other is probably for some buffer allocated on that heap. The New3DS version of these sizes are 0x1C000-bytes larger than the Old3DS sizes here.

HTTPS requests

Trusted RootCAs

During startup NIM-module creates two RootCertChains with HTTPC. Both of these only contain the same default cert with ID 0x3. The first RootCertChain is used with NetUpdateSOAP. Requests such as the "notifications.json" page don't use these RootCertChains(in this case just default certID 0xB is used).

SOAP

NetUpdateSOAP

There are exactly 3 types of network SOAP requests used with NetUpdateSOAP by NIM module, described below. This URL is contained in NIM module itself, however with certain requests it uses an identical URL loaded from an ECommerceSOAP response instead.

See also here.

GetSystemUpdate

Returns the current sysupdate title-listing. This also contains the SystemTitleHash returned by GetSystemTitleHash.

GetSystemTitleHash

Returns the current SystemTitleHash for the current sysupdate title-listing.

GetSystemCommonETicket

Returns the Base64-encoded cetk for each specified TitleId entry.

Sysupdate checking process

This section describes the process used when checking whether a sysupdate is required.

First the GetSystemTitleHash SOAP request is done. Then the SystemTitleHash in savedata hash.dat is compared with the received one. If they match and the SystemTitleHash flag is set to value 0x03, it will immediately return that no sysupdate is required. Otherwise it will start the GetSystemUpdate SOAP request handling.

The GetSystemUpdate SOAP request contains a titlelist of all NAND system-titles. For GetSystemUpdate response parsing, it compares each SOAP title_entry with the NAND system titlelist. If a SOAP titleID isn't found in the NAND titlelist, this means NAND is missing a new title and hence a sysupdate is required for installing that title. If a NAND title_entry-version is less than the SOAP title_entry-version, this means the title needs updated and hence a sysupdate is required.

An empty title-list in the GetSystemUpdate response would result in it returning that no sysupdate is required.

The titleIDs sent in the GetSystemUpdate SOAP request are decimal, while the titleIDs in the response are hex.

NIM System_SaveData

hash.dat

Offset Size Description
0x60 0x1 u8 flag used with the SystemTitleHash. 0x01 = latest sysupdate isn't installed as of last SOAP requests, 0x03 = latest sysupdate is installed as of last SOAP requests.
0x61 0x21 ASCII hex SystemTitleHash, including NUL-terminator. This is the latest SystemTitleHash which NIM module received from SOAP.