215
edits
Changes
Jump to navigation
Jump to search
Line 309:
Line 309: − + − bit00: power button pressed+ − bit01: power button pressed long − bit02: home button pressed − bit03: home button released − bit04: wifi slider pressed − bit05: shell got closed − bit06: shell got opened − bit07: ???, sends srv notification 0x20C − bit08: charger plugged in − bit09: charger plugged out − bit11: ???, signals an event − bit14: ???, sends srv notification 0x210 − bit15: ???, sends srv notification 0x20F − bit22: volume slider position changed − Line 350:
Line 336: − + + + + + + + + + + + + − + + + + + + + + + + + Line 434:
Line 441: − + − + Line 472:
Line 479: − + + + + + + + + + Line 500:
Line 515: − + Line 563:
Line 578: − + − + + + + + + + + + + + Line 595:
Line 620: − + Line 603:
Line 628: − +
Documented stuff and cleaned up a bit more
| s
| s
| ro
| ro
| Special HID status flags:
| Received interrupt bitmask, see register 0x18 for possible values
If no interrupt was received this register is 0
If nothing has changed this register is 0
|-
|-
| 0x14
| 0x14
| s
| s
| rw
| rw
| Interrupt mask (0=enabled,1=disabled)
| Interrupt mask for register 0x10 (0=enabled,1=disabled)
bit00: Power button press
bit01: Power button held (the 3DS turns off regardless after a fixed time)
bit02: HOME button press
bit03: HOME button release
bit04: WiFi switch button
bit05: Shell close
bit06: Shell open
bit07: Fatal hardware condition([[Services#Notifications|?]])
bit08: Charger removed
bit09: Charger plugged in
bit10: ??? (Power Management related?)
bit11: ??? (HID related)
bit11: ??? (HID related)
bit12: Accelerometer update
bit12: HID update
bit13: Battery dead(?)
bit14: ??? (Power Management related?)
bit15: ??? (Power Management related?)
bit22: Volume slider position change
bit24: ??? (???)
bit25: ??? (???)
bit26: ??? (???)
bit27: ??? (???)
bit28: ??? (???)
bit29: ??? (???)
bit30: forced off my mcu sysmodule
bit30: forced off my mcu sysmodule
bit31: forced off my mcu sysmodule
bit31: forced off my mcu sysmodule
|-
|-
| 0x29
| 0x29
| dynamic / s
| ds(0x64)
| ro / rw
| ro / rw
| Repeat register, any byte written in the first byte gets repeated indefinitely(?, needs confirmation past 0xFF). The rest of the bytes are read-only. Setting the shared byte of this register (via overflow glitches) will also work, confirming that this is a semi-dynamic register as the first byte is stored in the shared register pool, but the rest of the bytes are fake.
| Empty battery pattern holder, repeats all written bytes
|-
|-
| 0x2A
| 0x2A
| s
| s
| rw
| rw
| RTC time (system clock). 7 bytes are read from this. The upper nibble of each byte encodes 10s (BCD), so each byte is post-processed with (byte & 0xF) + (10 * (byte >> 4)). Byte 0 encodes seconds, byte 1 minutes, byte 2 hours, byte 3 is either the current day of the week or current week of month (not used by anything though), byte 4 days, byte 5 months and byte 6 years
| RTC time (system clock). 7 bytes are read from this. The upper nibble of each byte encodes 10s (BCD), so each byte is post-processed with (byte & 0xF) + (10 * (byte >> 4)).
byte 0: seconds
byte 1: minutes
byte 2: hours
byte 3: current day of the week (unused)
byte 4: days
byte 5: months
byte 6: years
byte 7: leap year counter (unused)
|-
|-
| 0x37
| 0x37
| s
| s
| rw
| rw
| ?
| Pedometer state (?)
|-
|-
| 0x41
| 0x41
|-
|-
| 0x4F
| 0x4F
| 6(?)
| 0x156
| ro
| ro
| Unkonwn. Reading past the 6th byte is FF-filled, so register size of 6 is assumed.
| ???
|-
|-
| 0x50
| 0x50
| s
| rw
| ???
|-
| 0x51
| s
| rw
| ???
|-
| 0x52
- 0x57
- 0x57
| s
| s
|-
|-
| 0x60
| 0x60
| 0x100
| ds(1)
| ro
| ro
first byte is wo
first byte is wo
|-
|-
| 0x61
| 0x61
| 0x100
| ds(0x100)
| rw
| rw
| Writing to this register pushes values on top of register 0x60's stack. Reading from this register doesn't advance the stack.
| Writing to this register pushes values on top of register 0x60's stack. Reading from this register doesn't advance the stack.