51
edits
Changes
mLine 1:
Line 1: − == Registers ==+ + + Line 7:
Line 9: − + − + − + − + − + − + − + − + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − REG_*MAIN registers are used for the top LCD, while SUB is used for the bottom LCD. The registers for the main LCD is located at 0x1EF00400, while the sub LCD registers are located at 0x1EF00500.+ − + − + + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + + − + − + + − + − + + + − + + − When the enable bit is set, the specified solid color is displayed on the LCD instead of the rendered graphics. − + − + − + + + + − + − + − + − + − This register might control the framebuffer dimensions, however writing to this doesn't affect the displayed LCD image.+ − + − + − + + + + − + − + − + − + − + + + − + − + − + + + + − + − + − + − + − + + + − + − + − + + + + + + + − + − + − + − + − + − + − + − + − |- − | 0x1EF0056C − | Sub LCD, second framebuffer − |- − | 0x1EF00594 − | Sub LCD, unused first framebuffer − |- − | 0x1EF00598 − | Sub LCD, unused second framebuffer − The above framebuffer registers contains the physical address for each framebuffer, normally located in FCRAM in the application's GSP heap.+ − + − These LCD framebuffers normally contain the last rendered frames from the GPU. The color format is BGR8. The framebuffers are drawn from left-to-right, instead of top-to-bottom.(Thus the beginning of the framebuffer is drawn starting at the left side of the screen) − − Both of the 3D screen left/right framebuffers are displayed regardless of the 3D slider's state, normally when the 3D slider's state is set to "off" the left/right framebuffer addresses are set to the same physical address.
Generalize naming
Other registers that used to be documented on this page are now at [[GPU Registers]].
= Registers =
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! NAME
! NAME
! WIDTH
! WIDTH
|-
|-
| REG_LCDCOLORFILLMAIN
| Parallax barrier enable
| 0x10202204
| 0x10202000
| 0x1ED02204
| 0x1ED02000
| 0xFFFD6204
| 0xFFFD6000
| 4
| 0x4
|-
|-
| REG_LCDCOLORFILLSUB
| Parallax barrier PWM
| 0x10202A04
| 0x10202004
| 0x1ED02A04
| 0x1ED02004
| 0xFFFD6A04
| 0xFFFD6004
| 4
| 0x4
|-
| LCD status
| 0x10202008
| 0x1ED02008
| 0xFFFD6008
| 0x4
|-
| LCD clock disable
| 0x1020200C
| 0x1ED0200C
| 0xFFFD600C
| 0x4
|-
| ?
| 0x10202010
| 0x1ED02010
| 0xFFFD6010
| 0x4
|-
| LCD reset
| 0x10202014
| 0x1ED02014
| 0xFFFD6014
| 0x4
|-
| Top Screen [[#LCD Configuration|LCD Configuration]]
| 0x10202200
| 0x1ED02200
| 0xFFFD6200
| 0x600
|-
| Bottom Screen [[#LCD Configuration|LCD Configuration]]
| 0x10202A00
| 0x1ED02A00
| 0xFFFD6A00
| 0x600
|-
| ?
| 0x10203200
| 0x1ED03200
| 0xFFFD7200
| 0x40
|}
|}
On screen-init (error screen), Boot11 sets 0x10202004 to 0xA390A39.
== REG_LCDCOLORFILL ==
== LCD Configuration ==
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Bit
! Offset
! Size
! Description
! Description
|-
|-
| 7-0
| 0x00
| Red component intensity
| 0x4
| [[#Flags|Flags]]
|-
| 0x04
| 0x4
| [[#Fill Color|Fill Color]]
|-
| 0x10
| 0x10
| [[#ABL Area|ABL Area]]
|-
| 0x20
| 0x4
| GTH Ratio
|-
| 0x24
| 0x4
| Min GTH
|-
| 0x28
| 0x4
| MinMax
|-
| 0x2C
| 0x4
| ExMax
|-
| 0x30
| 0x4
| Inertia
|-
| 0x38
| 0x4
| MinRS
|-
| 0x3C
| 0x4
| MaxRS
|-
| 0x40
| 0x4
| [[#Backlight Level|Backlight Level]]
|-
| 0x44
| 0x4
| [[#Backlight Interval|Backlight Interval]]
|-
| 0x60
| 0x20
| Dither
|-
|-
| 15-8
| 0x80
| Green component intensity
| 0x24
| LutListRS
|-
|-
| 23-16
| 0xF0
| Blue component intensity
| 0x0C
| ?
|-
|-
| 24
| 0x100
| Enable
| 0x100
| LCD calibration data, pulled from nand:/ro/sys/HWCAL0.dat offset 0x77C.
N3DS only. This area on old3DS is zero-filled and not writable.
|-
|-
| 31-25
| 0x200
| 0x400
| ?
| ?
|}
|}
== 0x1EF00X5C ==
=== Flags ===
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Bit
! Bit
! Description
! Description
|-
| 0
| ABL on
|-
|-
| 15-0
| 8
| Framebuffer width?
| ?
|-
|-
| 31-16
| 9
| Framebuffer height?
| ?
|}
|}
Bits 8 and 9 control dither.
== 0x1EF00X78 ==
=== Fill Color ===
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Bit
! Bit
! Description
! Description
|-
|-
| 0
| 7-0
| LCD framebuffer to display (0=first, 1=second)
| Red component intensity
|-
| 15-8
| Green component intensity
|-
|-
| 7-1
| 23-16
| ?
| Blue component intensity
|-
|-
| 31-8
| 24
| Unused
| Enable
|}
|}
== 0x1EF00X90 ==
When the enable bit is set, the specified solid color is displayed on the LCD instead of the framebuffer.
=== ABL Area ===
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Bit
! Offset
! Description
! Description
|-
|-
| 3-0
| 0x00
| ?
| X begin
|-
| 0x04
| X end
|-
|-
| 11-4
| 0x08
| Controls the framebuffer width
| Y begin
|-
|-
| 31-12
| 0x0C
| ?
| Y end
|}
|}
== Framebuffers ==
The values refer to 90° clockwise rotated screens.
=== Backlight Level ===
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Address
! Bit
! Description
! Description
|-
|-
| 0x1EF00468
| 9-0
| Main LCD, first framebuffer for 3D left
| Backlight PWM duty on (0 = off)
|}
=== Backlight Interval ===
{| class="wikitable" border="1"
! Bit
! Description
|-
|-
| 0x1EF0046C
| 9-0
| Main LCD, second framebuffer for 3D left
| Backlight PWM Interval, minus 1
|-
|-
| 0x1EF00494
| 16
| Main LCD, first framebuffer for 3D right
| Enable LCD (0 = disabled, 1 = enabled).
|-
|-
| 0x1EF00498
| 17
| Main LCD, second framebuffer for 3D right
| RS on (?)
|-
|-
| 0x1EF00568
| 18
| Sub LCD, first framebuffer
| ?
|}
|}
On old 2DS, disabling the top LCD does nothing, disabling the bottom LCD affects both screens.
Setting bit 18 makes the screen darker.