Difference between revisions of "NWMUDS:Bind"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
|- | |- | ||
| 2 | | 2 | ||
| − | | u32 | + | | u32 recv_buffer_size. Official user-processes require this to be >=0x646. This is the ''exact'' size of the buffer allocated under sharedmem used for storing the received data which can then be loaded via [[NWMUDS:PullPacket]](this includes header data). |
|- | |- | ||
| 3 | | 3 | ||
Revision as of 05:57, 14 April 2016
Request
| Index Word | Description |
|---|---|
| 0 | Header code [0x00120100] |
| 1 | BindNodeID |
| 2 | u32 recv_buffer_size. Official user-processes require this to be >=0x646. This is the exact size of the buffer allocated under sharedmem used for storing the received data which can then be loaded via NWMUDS:PullPacket(this includes header data). |
| 3 | u8 data_channel |
| 4 | u16 NetworkNodeID probably. Likely for controlling which device this BindNodeID can communicate with, or all of them when the broadcast alias is used. |
Response
| Index Word | Description |
|---|---|
| 0 | Header code |
| 1 | Result code |
| 2 | Value 0x0, handle transfer translate-header. |
| 3 | Output event handle. This is signaled every time data becomes available via NWMUDS:PullPacket. |
Data Channel
This is an arbitrary value to use for data-frame filtering. This bind will only receive data frames which contain a matching data_channel value. The input data_channel value for this command must be non-zero, otherwise error 0xE10113EA is returned.
Description
This initializes a BindNodeID for use on this device, etc. This can be done multiple times for initializing different BindNodeIDs.