Changes

{{IPC/RequestEntry|Header code}}

{{IPC/RequestEntry|Header code}}

{{IPC/RequestEntry|Result code}}

{{IPC/RequestEntry|Result code}}

{{IPC/RequestEntry|u8 battery_voltage}}

{{IPC/RequestEntry|u8 value}}

{{IPC/RequestEnd}}

{{IPC/RequestEnd}}

=Description=

=Description=

Returns a number which can be used to calculate the voltage using this formula: <code>magic * (voltage / 256)</code> where <code>magic</code> is a constant number which seems to range somewhere between <code>4.6</code> and <code>5.0</code>. Based on calculations and battery behavior it seems like it's indeed <code>5.0</code>.

Returns a number which can be used to calculate the voltage using <code>Vref * (value / 256)</code> where <code>Vref</code> seems to be <code>5.0v</code>.

When the charger is plugged into a fully charged old3DS unit, this value will be maximum 0xD1

When the charger is plugged into a fully charged old3DS, the value will be around 0xD1 (~4.1v)

Unplugging the charger will make the value go down to 0xCE

Unplugging the charger will make the value go down to 0xCE (~4v)

The voltage at 5% battery percentage just after the LEDs start flashing is 0xAF

The voltage at 5% battery percentage just after the LEDs start flashing is 0xAF (~3.4v)

Plugging in the charger at this point will make the voltage go up to 0xB9

Plugging in the charger at this point will make the voltage go up to 0xB9 (~3.6v)