| Wifi-related? Set to 1 very early in NWM-module.
| Wifi-related? Set to 1 very early in NWM-module.
|}
|}
+
+
==CFG11_TWLAGB_HIDEMU_MASK==
+
Set bits will use the corresponding values from [[#CFG11_TWLAGB_HIDEMU_PAD|CFG11_TWLAGB_HIDEMU_PAD]] instead of allowing the hardware to read it from [[HID_Registers#HID_PAD|HID_PAD]].
+
+
This is set to 0x1FFF (all buttons and the debug key) and [[#CFG11_TWLAGB_HIDEMU_PAD|CFG11_TWLAGB_HIDEMU_PAD]] is set to 0 when the "Close this software and return to HOME Menu?" dialog is shown to prevent the button presses from propagating to the DS/GBA CPU.
+
+
==CFG11_TWLAGB_HIDEMU_PAD==
+
Works the same way as [[HID_Registers#HID_PAD|HID_PAD]], but the values set here are only replaced in the HID_PAD seen by the DS/GBA CPU when the corresponding bits in [[#CFG11_TWLAGB_HIDEMU_MASK|CFG11_TWLAGB_HIDEMU_MASK]] are set.
==CFG11_GPU_CNT==
==CFG11_GPU_CNT==
Line 550:
Line 558:
Bit0: main (?) nRESET (active low), unset to reset (when not on reset, external GPU registers at 0x10400000+ are enabled).
Bit0: main (?) nRESET (active low), unset to reset (when not on reset, external GPU registers at 0x10400000+ are enabled).
+
When this is unset VRAM is not accessible and triggers exceptions.