6,263
edits
Changes
Jump to navigation
Jump to search
Line 53:
Line 53: − +
→0x10000000, Hidden bootrom off-switch
== 0x10000000, Hidden bootrom off-switch ==
== 0x10000000, Hidden bootrom off-switch ==
ARM9 bootrom 0xFFFF8000+ is disabled by writing 1 to (u8*)0x10000000 and 1 to (u8*)0x10000001?
The ARM9 and ARM11 [[Memory_layout|bootroms]](+0x8000) are disabled by writing 1 to (u8*)0x10000000 and 1 to (u8*)0x10000001?(These two registers are written by the ARM9)
Writing values here(u8 0x10000000+0) sets the specified bitmask. Thus, writing value 0x2 when the register(u8 0x10000000+0) was previously set to value 0x1 changes the value to 0x3. During the NATIVE_FIRM ARM9 kernel startup, it will check if bitmask 0x2 in this register is set. If that bitmask is not set, the console-unique portions of the two console-unique TWL [[AES|keyslots]] are then initialized. The kernel then writes value 0x2 to this register, regardless of the previous bitmask value(due to this, the console-unique TWL key-data init is only done at hard-boot).
Writing values here(u8 0x10000000+0) sets the specified bitmask. Thus, writing value 0x2 when the register(u8 0x10000000+0) was previously set to value 0x1 changes the value to 0x3. During the NATIVE_FIRM ARM9 kernel startup, it will check if bitmask 0x2 in this register is set. If that bitmask is not set, the console-unique portions of the two console-unique TWL [[AES|keyslots]] are then initialized. The kernel then writes value 0x2 to this register, regardless of the previous bitmask value(due to this, the console-unique TWL key-data init is only done at hard-boot).