5
edits
Changes
Jump to navigation
Jump to search
Line 11:
Line 11: − + Line 17:
Line 17: − + Line 23:
Line 23: − + Line 29:
Line 29: − + Line 35:
Line 35: − + Line 41:
Line 41: − + Line 47:
Line 47: − + Line 53:
Line 53: − + Line 59:
Line 59: − + Line 65:
Line 65: − + Line 71:
Line 71: − + Line 77:
Line 77: − + Line 105:
Line 105: + + + + + + + + + + + + + + + + + + + + + Line 111:
Line 132: − + Line 173:
Line 194: − + Line 179:
Line 200: − + Line 185:
Line 206: − + Line 191:
Line 212: − + Line 203:
Line 224: − + Line 223:
Line 244: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + − + + + + + + + + + + + + + + + − + − + − + + − + − + − + + + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + + + + + + + + + + + − + + + + + + + + + + + + − + − + + + + + + + − + − + + − + − + + + + + + + + + + − + − + + − + − + + + + + + + + − + − + + − + + − + − + + + + + + + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + − + + − + − + − + + + + − + − + − + + + + − + − + − + + − + − + − + + − + − + − + + − + − + − + + − + − + − + + − + − + − + + + + + + + + − + − + − + + − + − + − + + − + − + − + + + − + − + − + + − + − + − + + + − + − + + + + + + + − + − + + − + + + + + + + + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 393:
Line 1,205: − + + + Line 483:
Line 1,297: − + + + + + + +
→Device 3: MCU bit 11: Accelerometer status
| 0x10161000
| 0x10161000
| 1
| 1
|
| I2C bus 1 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10161001
| 0x10161001
| 1
| 1
|
| I2C bus 1 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10161002
| 0x10161002
| 2
| 2
|
| I2C bus 1 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10161004
| 0x10161004
| 2
| 2
|
| I2C bus 1 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10144000
| 0x10144000
| 1
| 1
|
| I2C bus 2 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10144001
| 0x10144001
| 1
| 1
|
| I2C bus 2 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10144002
| 0x10144002
| 2
| 2
|
| I2C bus 2 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10144004
| 0x10144004
| 2
| 2
|
| I2C bus 2 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10148000
| 0x10148000
| 1
| 1
|
| I2C bus 3 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10148001
| 0x10148001
| 1
| 1
|
| I2C bus 3 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10148002
| 0x10148002
| 2
| 2
|
| I2C bus 3 devices
|-
|-
| style="background: green" | Yes
| style="background: green" | Yes
| 0x10148004
| 0x10148004
| 2
| 2
|
| I2C bus 3 devices
|}
|}
| 7
| 7
| Start/busy (0=Ready, 1=Start/busy)
| Start/busy (0=Ready, 1=Start/busy)
|}
== I2C_CNTEX ==
{| class="wikitable" border="1"
! BIT
! DESCRIPTION
|-
| 0-1
| ? Set to 2 normally.
|}
== I2C_SCL ==
{| class="wikitable" border="1"
! BIT
! DESCRIPTION
|-
| 0-5
| ?
|-
| 8-12
| ? Set to 5 normally.
|}
|}
! [[I2C_Registers|Device id]]
! [[I2C_Registers|Device id]]
! Device bus id
! Device bus id
! Device address
! Device Write Address
! Accessible via I2C [[I2C_Services|service]]
! Accessible via I2C [[I2C_Services|service]]
! Device description
! Device description
| 0xa6
| 0xa6
| "i2c::HID"
| "i2c::HID"
| Unknown. The device table in I2C-module had the device address changed from 0xA6 to 0xD6 with [[8.0.0-18]].
| Gyroscope. The device table in I2C-module had the device address changed from 0xA6 to 0xD6 with [[8.0.0-18]].
|-
|-
| 10
| 10
| 0xd0
| 0xd0
| "i2c::HID"
| "i2c::HID"
| Gyroscope
| Gyroscope (old3DS)
|-
|-
| 11
| 11
| 0xd2
| 0xd2
| "i2c::HID"
| "i2c::HID"
| ?
| Gyroscope (2DS, new3DSXL, new2DSXL)
|-
|-
| 12
| 12
| 0xa4
| 0xa4
| "i2c::HID"
| "i2c::HID"
| DebugPad
| DebugPad (slightly modified [https://wiibrew.org/wiki/Wiimote/Extension_Controllers/Classic_Controller_Pro Wii Classic Controller Pro])
|-
|-
| 13
| 13
| 0xa0
| 0xa0
| "i2c::EEP"
| "i2c::EEP"
| eeprom?
| HWCAL EEPROM ([[Hardware_calibration#Header|only present on dev units where SHA256 is used for HWCAL verification]])
|-
|-
| 15
| 15
| Used by IR-module starting with [[8.0.0-18]], for New3DS-only HID via "ir:rst". This deviceid doesn't seem to be supported by i2c module on [[8.0.0-18]](actual support was later added in New3DS i2c module).
| Used by IR-module starting with [[8.0.0-18]], for New3DS-only HID via "ir:rst". This deviceid doesn't seem to be supported by i2c module on [[8.0.0-18]](actual support was later added in New3DS i2c module).
|}
|}
'''Notice''': These device addresses are used for writing to the respective device, for reading bit0 must be set (see I2C protocol). Thus, the actual device address is >> 1.
== Device 3 ==
== Device 3 ==
ro = read-only (writing is no-op)
rw = read-write
wo = write-only (reading will yield 00, FF, or unpredictable data)
d* = dynamic register (explaination below this table)
s* = shared register (explaination below this table)
ds = dynamic shared (explaination below this table)
Reading or writing multiple bytes from/to single-byte registers increments the register ID along with it. For example reading two bytes from reg 0x00 reads regs 0x00 and 0x01.
This is not the case for multibyte regs (0x29, 0x2D, 0x4F, 0x61 and 0x7F), plus reg 0x60.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! REGISTER
! REGISTER
! WIDTH
! WIDTH
! INFO
! DESCRIPTION
! DESCRIPTION
|-
| 0x00
| s
| ro
| Version high
|-
| 0x01
| s
| ro
| Version low
|-
| 0x02
| d
| rw
| For bit0 and 1 values, writing will mask away/"acknowledge" the event, set to 3 by mcuMainLoop on reset if reset source is Watchdog
bit0: RTC clock value got reset to defaults
bit1: Watchdog reset happened
bit5: TWL MCU reg: volume mode (0: 8-step, 1: 32-step)
bit6: TWL MCU reg: NTR (0) vs TWL mode (1)
bit7: TWL MCU reg: Uses NAND
|-
|-
| 0x03
| 0x03
| 8
| ds
| ?
| rw
| Top screen Vcom
|-
|-
| 0x04
| 0x04
| 8
| ds
| rw
| Bottom screen Vcom
|-
| 0x05
- 0x07
| s
| rw
| Danger zone - [[MCU_Services#MCU_firmware_versions|MCU unlock sequence]] is written here.
|-
| 0x08
| s
| ro
| Raw 3D slider position
|-
| 0x09
| s
| ro
| Volume slider state (0x00 - 0x3F)
This is the same value returned by [[MCUHWC:GetSoundVolume|MCUHWC:GetSoundVolume]]
|-
| 0x0A
| s
| ro
| Battery temperature (in Celcius?)
|-
| 0x0B
| s
| ro
| Battery percentage
|-
| 0x0C
| s
| ro
| Battery percentage, fractional part (seems to have a resolution of around 0.1% according to tests)
|-
| 0x0D
| s
| ro
| System voltage
|-
| 0x0E
| s
| ro
| ?
| ?
|-
|-
| 0x09
| 0x0F
| 1
| s
| Sound volume: 0x0..0x3F.
| ro
| Flags: bit7-5 are read via [[MCU_Services|mcu::GPU]]. The rest of them are read via [[MCU_Services|mcu::RTC]].
bit1: ShellState
bit3: AdapterState
bit4: BatteryChargeState
bit5: Bottom screen backlight on
bit6: Top screen backlight on
bit7: LCD panel voltage on
|-
| 0x10
- 0x13
| s
| ro
| Received interrupt bitmask, see register 0x18 for possible values
If no interrupt was received this register is 0
|-
|-
| 0xB
| 0x14
| 1
| s
| Battery level: 0x0..0x40.
| ro
| Unused and unwritable byte :(
|-
|-
| 0xF
| 0x15
| 1
- 0x17
| Flags: bit7-5 are read via [[MCU_Services|mcu::GPU]]. The rest of these are read via [[MCU_Services|mcu::RTC]]: bit4 = BatteryChargeState. bit3 = AdapterState. bit1 = ShellState.
| s
| rw
| Unused and unreferenced free RAM! Good for userdata.
|-
|-
| 0x18
| 0x18
| 8
- 0x1B
| ?
| s
| rw
| Interrupt mask for register 0x10 (0=enabled,1=disabled)
bit00: Power button press (for 27 "ticks")
bit01: Power button held (for 375 "ticks"; the 3DS turns off regardless after a fixed time)
bit02: HOME button press (for 5 "ticks")
bit03: HOME button release
bit04: WiFi switch button
bit05: Shell close
bit06: Shell open
bit07: Fatal hardware condition([[Services#Notifications|?]]) (sent when the MCU gets reset by the Watchdog timer)
bit08: Charger removed
bit09: Charger plugged in
bit10: RTC alarm (when some conditions are met it's sent when the current day and month and year matches the current RTC time)
bit11: Accelerometer I2C read/write done [https://github.com/profi200/libn3ds/blob/083c8ffa3f56a49802fa74b6afe45a96820f0439/include/arm11/drivers/mcu_regmap.h#L124]
bit12: HID update
bit13: Battery percentage status change (triggered at 10%, 5%, and 0% while discharging)
bit14: Battery stopped charging (independent of charger state)
bit15: Battery started charging
Nonmaskable(?) interrupts
bit16: ???
bit17: ??? (opposite even for bit16)
bit22: Volume slider position change
bit23: ??? Register 0x0E update
bit24: GPU off
bit25: GPU on
bit26: bottom backlight off
bit27: bottom backlight on
bit28: top backlight off
bit29: top backlight on
bit30: bit set by mcu sysmodule
bit31: bit set by mcu sysmodule
|-
| 0x1C
- 0x1F
| s
| rw
| Unused and unreferenced free RAM! Good for userdata.
|-
|-
| 0x20
| 0x20
| 8
| d
| Writing u8 value 4 here triggers a hardware system reboot. Writing u8 value 1 (repeatedly) triggers a shutdown via power-off?
| wo
| System power control:
bit0: power off
bit1: full reboot (unused). Discards things like [[CONFIG9_Registers#CFG9_BOOTENV|CFG9_BOOTENV]]
- Asserts RESET1 via PMIC command (?) (deasserts nRESET1). This could be the reset that controls some CFG9 registers
- Asserts RESET2 (P0.1 = 0, PM0.1 = 0 (output)) (deasserts nRESET2)
- Asserts FCRAM_RESET (P3.0 = 0) (deasserts nFCRAM_RESET)
bit2: normal reboot. Preserves [[CONFIG9_Registers#CFG9_BOOTENV|CFG9_BOOTENV]], etc.
- Asserts RESET2 (P0.1 = 0, PM0.1 = 0)
- If in NTR emulation mode (see reg 0x02), asserts FCRAM_RESET (P3.0 = 0)
- Resets TWL MCU i2c registers
bit3: FCRAM reset (present in by LgyBg. Unused because a system reboot does the same thing & a PDN reg also possibly implements this function)
- Asserts FCRAM_RESET (P3.0 = 0)
bit4: signal that sleep mode is about to be entered (used by PTM)
Bit 4 sets a bit at a RAM address which seems to control the watcdog timer state, then this bit is immediately unmasked. This field has a bitmask of 0x0F.
If any of the reset bits is set, the MCU waits for 5ms, then deasserts RESET1 (via PMIC), RESET2 (PM0.1 = 1 (input)) and FCRAM_RESET (P3.0 = 1), and reinitializes some other various registers after a 100ms delay.
|-
| 0x21
| d
| wo
| Used in legacy mode to signal events for TWL MCU "emulation" (written to REG[0x5D])? Software then asserts the TWL MCU IRQ pin via [[#LGY_GPIOEMU_MASK|Legacy I/O registers]].
bit0: Signal TWL POWER button click
bit1: Signal TWL reset
bit2: Signal TWL power off
bit3: Signal TWL battery low
bit4: Signal TWL battery empty
bit5: Signal TWL volume button click
|-
|-
| 0x22
| 0x22
| 8
| d
| ?
| wo
| Used to turn on or turn off LCD-related boost circuits. Bits 5:2 can be read back so see whether backlight setting is in progress or not, however bits 1:0 get cleared as soon as the request gets acknowledged.
bit0: LCD panel voltage off
bit1: LCD panel voltage on
bit2: Bottom screen backlight off
bit3: Bottom screen backlight on
bit4: Top screen backlight off
bit5: Top screen backlight on
Bits 4 and 5 have no effect on a 2DS because the backlight source is the bottom screen.
The rest of the bits are masked away.
|-
|-
| 0x23
| 0x23
| 8
| d
| wo
| Writing 0x72 ('r') resets the MCU, but this is stubbed on retail?
|-
| 0x24
| s
| rw
| Watchdog timer. This must be set *before* the timer is triggered, otherwise the old value is used. Value zero disables the watchdog.
|-
| 0x25
| s
| rw
| ?
| ?
|-
|-
| 0x24
| 0x26
| 8
| s
| rw
| ?
| ?
|-
| 0x27
| sd
| rw
| Raw volume slider state
|-
|-
| 0x28
| 0x28
| 8
| s
| ?
| rw
| Brightness of the WiFi/Power LED
|-
|-
| 0x29
| 0x29
| 8
| sd(5)
| ?
| rw
| Power mode indicator state (read-write)
1 = forced default blue
2 = sleep mode animation
3 = "power off" mode
4 = disable blue power LED and turn on red power LED
5 = disable red power LED and turn on blue power LED
6 = animate blue power LED off and flash red power LED
anything else = automatic mode
The other 4 bytes (32bits) affect the pattern of the red power LED (write only)
|-
|-
| 0x2A
| 0x2A
| 8
| s
| ?
| rw
| WiFi LED state, non-0 value turns on the WiFi LED, 4 bits wide
|-
|-
| 0x2B
| 0x2B
| 8
| s
| ?
| rw
| Camera LED state, 4bits wide,
0, 3, 6-0xF = off
1 = slowly blinking
2 = constantly on
3 = "TWL" mode
4 = flash once
5 = delay before changing to 2
|-
|-
| 0x2C
| 0x2C
| 8
| s
| ?
| rw
| 3D LED state, 4 bits wide
|-
|-
| 0x2D
| 0x2D
| 0x64
| 0x64
| This is used for [[MCURTC:SetInfoLEDPattern|controlling]] the notification LED(see [[MCURTC:SetInfoLEDPatternHeader]] as well), when this register is written.
| wo
| This is used for [[MCURTC:SetInfoLEDPattern|controlling]] the notification LED (see [[MCURTC:SetInfoLEDPatternHeader]] as well), when this register is written. It's possible to write data here with size less than 0x64, and only that portion of the pattern data will get overwritten. Reading from this register only returns zeroes, so it's considered write-only. Writing past the size of this register seems to do nothing.
|-
|-
| 0x2E
| 0x2E
| 1
| s
| This [[MCURTC:GetInfoLEDStatus|returns]] the notification LED status when read.
| ro
| This [[MCURTC:GetInfoLEDStatus|returns]] the notification LED status when read (1 means new cycle started)
|-
| 0x2F
| s
| wo?
| ??? The write function for this register is stubbed.
|-
|-
| 0x30
| 0x30
| 8
- 0x36
| RTC time (system clock)
| ds
| rw
| RTC time (system clock). 7 bytes are read from this. The upper nibble of each byte encodes 10s (BCD), so each byte is post-processed with (byte & 0xF) + (10 * (byte >> 4)).
byte 0: seconds
byte 1: minutes
byte 2: hours
byte 3: current week (unused)
byte 4: days
byte 5: months
byte 6: years
|-
| 0x37
| s
| rw
| RTC time byte 7: leap year counter / "watch error correction" register (unused in code)
|-
| 0x38
- 0x3C
| s
| rw
| RTC alarm registers
byte 0: minutes
byte 1: hours
byte 2: day
byte 3: month
byte 4: year
|-
|-
| 0x31
| 0x3B
| 8
| s
| ?
| rw
| Could be used on extremely old MCU_FIRM versions to upload [[MCU_Services#MCU_firmware_versions|MCU firmware]] if reg 0xF == 0 and reg 0x10 == 1 (presumably major and minor version fields for mcufw 0.1 which largely predates factory firm).
|-
|-
| 0x32
| 0x3D
| 8
0x3E
| ?
| ds
| ro
| RTC tick counter / "ITMC" (when resets to 0 the seconds increase)
Only reading 0x3D will update the in-RAM value
|-
|-
| 0x33
| 0x3F
| 8
| d
| ?
| wo
| 2 bits
bit0: Asserts RESET1 (P0.0 = 0, PM0.0 = 0 (output)) but does NOT deassert it (wtf?). This seems to kill the entire SoC: is it because it doesn't deassert it, or does it not deassert it because the SoC hangs anyway? This is the pin that controls some security-critical regs like CFG9_BOOTENV!
bit1: turns on a prohibited bit in an RTC Control register and turns P12 into an output
|-
|-
| 0x34
| 0x40
| 8
| s
| ?
| rw
| Tilt sensor sampling mode. Bits 0 and 1 control the mode. If bits 0 or 1 are set then the tilt sensor is enabled and sampled.
|-
|-
| 0x35
| 0x41
| 8
| s
| ?
| rw
| Index selector for register 0x44
|-
|-
| 0x36
| 0x42
| 8
| s
| ?
| rw
| Unused?
|-
|-
| 0x37
| 0x43
| 8
| s
| ?
| rw
| Unused???, accelometer related
|-
|-
| 0x38
| 0x44
| 8
| s
| ?
| rw
| ???, pedoometer related(?)
|-
|-
| 0x39
| 0x45
| 8
- 0x4A
| ?
| s
| ro
| Tilt sensor 3D rotation from the 12bit ADC, left shifted 4 to fit in a 16bit signed short, relative to the 3DS bottom screen
{| class="wikitable" border="1"
! AXIS
! V=0x00
! V=0x40
! V=0xC0
|-
|-
| 0x3A
| X (left/right)
| 8
| held up vertically
| ?
| rotated left 90° like a steering wheel
| rotated right 90° like a steering wheel
|-
|-
| 0x3B
| Y (forwards/backwards)
| 8
| laid flat on the desk with the screen facing up
| ?
| held up vertically
| held up vertically with screen facing upside-down
|-
|-
| 0x3C
| Z (???)
| 8
| ???
| ?
| ???
| ???
|}
|-
|-
| 0x41
| 0x4B
| 8
| s
| ?
| rw
| PedometerStepCount (for the current day)
|-
|-
| 0x43
| 0x4C
| 8
0x4D
| ?
| ??
| ??
| ??
|-
|-
| 0x4E
| 0x4E
| 8
| d
| ?
| rw
| ??? this = (0xFFE9E & 1) ? 0x10 : 0
|-
| 0x4F
| d(6)
| ro
|
|-
|-
| 0x50
| 0x50
| 8
| s
| ?
| rw
| ???
|-
|-
| 0x51
| 0x51
| 8
| s
| rw
| ???
|-
| 0x52
- 0x57
| s
| rw
| ?
| ?
|-
|-
| 0x58
| 0x58
| 8
| s
| ?
| rw
| Register-mapped ADC register
DSP volume slider 0% volume offset (setting this to 0xFF will esentially mute the DSP as it's the volume slider's maximum raw value)
|-
| 0x59
| s
| rw
| Register-mapped ADC register
DSP volume slider 100% volume offset (setting both this and the above to 0 will disable the volume slider with 100% volume, setting this to a lower value than the above will make the volume slider have only 2 states; on and off)
|-
| 0x5A
| s
| ro/rw
| Invalid, do not use! On newer MCU_FIRM versions this is unused, but on older MCU_FIRM versions this is a read-only counter.
|-
| 0x5B
- 0x5F
| s
| -
| These registers are out of bounds (0xFFC00 and up), they don't exist, writing is no-op, reading will yield FFs.
|-
| 0x60
| d
| rw
| Free register bank address (index) select
Selects the index to read from in the free register bank, up to 200. Used in conjunction with reg 0x61.
byte 0: bit0 = "WirelessDisabled", bit1 = "SoftwareClosed", bit2 = "PowerOffInitiated", bit3 = "LgyNativeResolution", bit4 = "LegacyJumpProhibited"
byte 1: Legacy LCD data
bytes 2 and 3: Local Friend Code counter
bytes 4 and 5: UUID clock sequence
bytes 6 and 7: Unused
bytes 8 to 175: Playtime data for legacy titles
bytes 176 to 188: Playtime data
bytes 188 to 199: Unused
|-
| 0x61
| d(200)
| rw
| Free register bank, data is read from/written to here.
Accessing N bytes of this register increments the selected index by N.
|-
| 0x62 - 0x7E
| s
| -
| These registers don't exist, writing is no-op, reading will yield FFs.
|-
| 0x7F
| d(9-0x13)
| ro
| Various system state information (debug pointer table)
byte 0x00: Console type, see [[Configuration_Memory#MCU_HW_INFO|here]]
byte 0x01: PMIC vendor code
byte 0x02: Battery vendor code
byte 0x03: MGIC version (major?)
byte 0x04: MGIC version (minor?)
byte 0x05: RCOMP(?)
byte 0x06: battery related? (seems to decrease while charging and increase while discharging)
byte 0x09: system model (see [[Cfg:GetSystemModel#System_Model_Values|Cfg:GetSystemModel]] for values)
byte 0x0A: Red Power LED mode (0 = off, 1 = on)
byte 0x0B: Blue Power LED intensity (0x00 - 0xFF)
byte 0x0D: RGB LED red intensity
byte 0x0E: RGB LED green intensity
byte 0x0F: RGB LED blue intensity
byte 0x11: WiFi LED brightness
byte 0x12: raw button states?
bit0: unset while Power button is held
bit1: unset while HOME button is held
bit2: unset while WiFi slider is held
bit5: unset while the charging LED is active
bit6: unset while charger is plugged in
On MCU_FIRM major version 1 the size of this is 9, reading past the 9th byte will yield AA instead of FF.
|-
| 0x80
- 0xFF
| s
| -
| These registers don't exist, writing is no-op, reading will yield FFs.
|}
Shared register: the letter "s" means that the given register is in a "shared register pool", meaning the resgister is in the register pool in RAM at address <code>0xFFBA4 + registernumber</code>.
Dynamic register: these registers aren't in the shared pool, they just "pretend" to be there. These registers often don't retain their set value, change rapidly, or control various hardware.
Non-shared (dynamic) register: it's a register whose contents separate from the shared register pool. Messing with these registers will not affect the shared register pool at all.
On old versions of MCU_FIRM none of the invalid registers are masked away by the read handler function, but are still read-only. Newer MCU_FIRM versions return the hardcoded value FF instead.
== Device 5 & 6 ==
These are the chip-on-glass display controllers, also known as I2CLCD.
=== Shared registers ===
These registers are the same across all known I2CLCD controllers (except Controller ID 0x00).
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x01
| Display enable
| 0x11
| Values:
- 0x00 - screen off, slow burn-in
- 0x01 - screen off, fast burn-in
- 0x10 - screen on, color input used
- 0x11 - screen on, color input not used, High-Z (display turns black or white depending on interface config)
|-
| 0x40
| Read address
|
| Write to this register to set the read address.
Reading from I2CLCD is non-standard. When you read, it returns pairs of the currently read address, and then the data byte at that address. The read address auto-increments.
|-
| 0x54
| Checksum? trigger
| 0x01
| When transitioning bit0 from 0 to 1, it seems to trigger some sort of checksum calcuation. Broken on controller 0x01, where it's oneshot.
|-
| 0x55
| ???
| 0x03 (all) /
0x07 (2DS)
| Unknown. When toggling 0x54 bit0 from 0 to 1, this register gets changed to 0x01 (all) / 0x05 (2DS).
This register is sometimes seen with a value of 0x02 at initialization time on the top screen.
|-
| 0x56
| Checksum?
|
| Unknown. Read-writable with no effect (old3DS) / read-only (all).
A random value is written here when 0x54 bit0 is changed from 0 to 1. Constantly updates with a seemingly random value, except on Controller ID 0x01, where it's oneshot/bugged.
|-
|-
| 0x60
| 0x60
| 8
| ???
| ?
| 0x01
| Unknown. 0x00 is written here during init. Seems to have no effect.
|-
| 0x61
| Register checksum
|
| Some - but not all - register values are combined using an unknown algorithm into this register.
It's unknown which registers influence this value, as some registers which influence this value are read-only.
|-
| 0x62
| ???
| 0x01
| Unknown, does nothing on known controllers. During init, gsp waits for this to become 0x01.
|-
| 0xFE
| ???
|
| Unknown, does nothing. 0xAA is written here during init.
|-
| 0xFF
| Controller ID
|
| Upper 4bits is manufacturer. Lower 4bits is unknown, most likely revision, possibly encoded as a Johnson counter. The fields are encoded this way, most likely for the register checksum feature.
Manufacturers:
- 0x0 - SHARP (LTPS(?) TN), old I2CLCD, found in old3DS (non-XL) only
- 0x1 - JDI (LTPS IPS), found in select new3DS and new3DSXL consoles
- 0xC - SHARP (LTPS(?) TN), new I2CLCD
- 0xE - SHARP (TFT), found in 2DS only
Known IDs:
- 0xC7 - new3DS, new3DSXL, new2DSXL, and some select newer old3DSXL
- 0xC3 - older old3DSXL
- 0xE1 - 2DS
- LQ050B1LW10B
- LQ = normal TFT
- 050 = panel 5 inches diagonal
- B = "other" display format
- 1 = transmissive (backlight-compatible)
- L = LVDS
- W = *unknown coating type*
- 10 = model number
- B = *unknown suffix*
- 0x10 - some select new3DS and new3DSXL with IPS screens
- 0x01 - old3DS
- LS035T7LE38P (top screen)
- LS = TFT (LTPS or SI-TFT ?)
- 035 = panel 3.5 inches diagonal
- T = "other 16:9" (even though the panel is 16:10 in physical size, or 32:10 in terms of pixel count)
- 7 = *unknown backing type*
- L = LVDS
- E = *unknown coating type*
- 38 = model number
- P = *unknow suffix*
- LS030Q7DW48P (bottom screen)
- LS = TFT (LTPS or SI-TFT ?)
- 030 = panel 3 inches diagonal
- Q = QVGA (320x240)
- 7 = *unknown backing type*
- D = parallel RGB (unspecified, but it's known to be RGB888 for this display)
- W = *unknown coating type*
- 48 = model number
- P = *unknow suffix*
- 0x00 - no controller, or dead (I2CLCD always ACKs reads, but returns 00 if dead)
|}
=== Custom registers for controller 0x00 ===
This Controller ID is fully unknown, and the only reason we know about its existance is due to gsp having special handling code for it.
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x11
| ???
|
| Unknown. Write 0x10 to initialize.
|-
| 0x50
| ???
|
| Unknown. Write 0x01 to initialize.
|}
=== Custom registers for controller 0x01 ===
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x10
| Interface config
| 0xF7
| Regonfigures the input pins and pin behavior of the controller.
bit0 - color value invert (D = ~D, or D = 255 - D)
bit1 - color format remap (D7:D2 <-- D5:D0, that is left shift color data by 2)
bit2 - ???
bit4 - ???
bit5 - ???
bit6 - ???
bit7 - DS-style undriven screen (it will be white instead of black, see shared register 0x01)
|-
| 0x11
| Image config
| 0x7F
| Image filters and pixel clock control.
bit0 - Horizontal Flip (scan from right to left)
bit1 - red-blue swap
bit2 - ???
bit3 - ???
bit4 - ???
bit5 - ???
bit6 - ???
|-
| 0x1D
| ???
| 0x0F
| Unknown, bit0 enables registers 0x12 to 0x19 to control some analog timing controls to the display panel itself.
|-
| 0x50
| ???
| 0x11
| Unknown. Has no effect on bottom screen. On the top screen, bit4 blanks out the display (LVDS disable?).
|-
| 0x53
| ???
| 0x73
| Unknown. While other bits seem to have no effect, bit0 kills the controller until a power cycle.
|}
=== Custom registers for controller 0xC3 ===
Basically the same as Controller ID 0xC7.
=== Custom registers for controller 0xC7 ===
This is the most common non-old3DS display controller. Quite overclockable.
Note: on the 0xC7 controller unlocking the factory controls at register 0x03 glitches out most of the standard controls (like registers 0x50 to 0x56), so use with caution.
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x03
| Factory key 2
|
| Write 0xAA here to unlock a second set of factory controls.
|-
| 0xAF
| Factory key
|
| Write 0xAA here to unlock factory controls.
|}
Factory mode registers for unlock register 0x03:
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x10
| Image control?
| 0xD7
| Most bits are unknown.
bit0 - color invert
bit1 - slight gamma increase
|-
| 0x11
| Image transform?
| 0x7F
| Mostly unknown.
bit0 - Invert horizontal scan direction (0 = left to right, 1 = right to left)
bit1 - red-blue swap
bit2 - Invert vertical scan direction (0 = top to bottom, 1 = bottom to top)
bit3 - Invert the order of each scanline pair (might be needed if bit2 is toggled)
bit4 - Enable interlaced signal (use bit3 to swap fields)
bit5 - ???
bit6 - ???
|-
| 0x70-0x83
| Color curve red
| rowspan=3 |
| rowspan=3 | These registers are used for fine-tuning the analog driving curve of the screen
Positive:
- byte 00 (0xFF) - ???
- byte 01 (0xFF) - ???
- byte 02 (0x3F) - ???
- byte 03 (0x3F) - ???
- byte 04 (0x3F) - ???
- byte 05 (0x3F) - ???
- byte 06 (0x3F) - ???
- byte 07 (0x3F) - ???
- byte 08 (0x3F) - ???
- byte 09 (0x3F) - ???
Negative:
- byte 10 (0xFF) - ???
- byte 11 (0xFF) - ???
- byte 12 (0x3F) - ???
- byte 13 (0x3F) - ???
- byte 14 (0x3F) - ???
- byte 15 (0x3F) - ???
- byte 16 (0x3F) - ???
- byte 17 (0x3F) - ???
- byte 18 (0x3F) - ???
- byte 19 (0x3F) - ???
|-
| 0x84-0x97
| Color curve green
|-
| 0x98-0xAB
| Color curve blue
|}
=== Custom registers for controller 0xE1 ===
This controller is designed to drive a split panel. As such, the factory controls have been slightly altered to accomodate this.
This is the only I2CLCD which responds on both I2CLCD addresses. The dominant screen is the bottom one.
Most registers are similar to controller 0xC7, but there are some differences due to the split shared panel nature.
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x03
| Factory key 2
|
| Write 0xAA here to unlock a 2nd set of factory controls.
|-
| 0xAF
| Factory key
|
| Write 0xAA here to unlock factory controls.
|}
Factory mode registers for unlock register 0x03:
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x10
| Image control?
| 0xD7
| Most bits are unknown. This applies to the whole display panel.
bit0 - color invert
bit1 - slight gamma increase
|-
| 0x11
| Image transform
| 0x33
|
bit0 - top half horizontal flip
bit1 - top half red-blue swap
bit4 - bottom half horizontal flip
bit5 - bottom half red-blue swap
|-
| 0x70-0x83
| Analog curve top
| rowspan=2 |
| rowspan=2 | Consists of two unknown curve values. Seems to be nonstandard.
Pair 1:
byte 00 (0xFF) - ???
byte 01 (0xFF) - ???
byte 02 (0xFF) - ???
byte 03 (0xFF) - ???
byte 04 (0x3F) - ???
byte 05 (0x3F) - ???
byte 06 (0x3F) - ???
byte 07 (0x3F) - ???
byte 08 (0x3F) - ???
byte 09 (0x3F) - ???
Part 2:
byte 10 (0xFF) - ???
byte 11 (0xFF) - ???
byte 12 (0xFF) - ???
byte 13 (0xFF) - ???
byte 14 (0x3F) - ???
byte 15 (0x3F) - ???
byte 16 (0x3F) - ???
byte 17 (0x3F) - ???
byte 18 (0x3F) - ???
byte 19 (0x3F) - ???
|-
| 0x84-0x97
| Analog curve bottom
|}
=== Custom registers for controller 0x10 ===
JDI IPS controller.
Warning: on the JDI controller, unlocking any of the factory mode registers overshadows some other registers, so don't write to "standard" locations (other than register 0x40) before locking factory mode back!
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x03
| Factory key 2
|
| Write 0xAA here to unlock advanced IPS curve controls.
|-
| 0xAF
| Factory key
|
| Write 0xAA here to unlock factory controls.
|}
Factory mode registers unlocked by register 0xAF:
* 0x41 - 0x4F
* 0x58 - 0x5F
* 0x67 - 0x6F
* 0xD0 - 0xEF
* unknown...
Factory mode registers unlocked by register 0x03:
* 0x04 - 0x0F
* unknown...
{| class="wikitable" border="1"
! Register
! Name
! Valid bits
! Description
|-
| 0x70-0x7F
| Driving curve 1-1
|
|
|-
| 0x80-0x8F
| Driving curve 1-2
|
|
|-
| 0x90-0x9F
| Driving curve 2-1
|
|
|-
| 0xA0-0xAF
| Driving curve 2-2
|
|
|-
| 0xB0-0xBF
| Driving curve 3-1
|
|
|-
| 0xC0-0xCF
| Driving curve 3-2
|
|
|}
|}
== Device 10 ==
== Device 10 ==
See the datasheet linked to on the [[Hardware]] page for reference.
== Device 11 ==
See the datasheet linked to on the [[Hardware]] page for reference.
See the datasheet linked to on the [[Hardware]] page for reference.
|}
|}
This is the DebugPad device, see [[HID_Shared_Memory|here]].
This is a [https://wiibrew.org/wiki/Wiimote/Extension_Controllers/Classic_Controller_Pro Wii Classic Controller Pro] which was slightly modified to have an encrypted device type of 0xF0 [https://wiibrew.org/wiki/Wiimote/Extension_Controllers#The_New_Way instead of 0xFD].
See [[HID_Shared_Memory#Offset_0x238|here]] for the HID shared memory report format.
== Device 13 ==
== Device 13 ==
|}
|}
See the datasheet linked to on the [[Hardware]] page for reference. From that datasheet, for the structure of the I2C register address u8: "Bit 0 is not used, bits 2:1 select the channel, bits 6:3 select one of the UART internal registers. Bit 7 is not used with the I2C-bus interface, but it is used by the SPI interface to indicate a read or a write operation."
See the [http://www.alldatasheet.net/datasheet-pdf/pdf/347838/NXP/SC16IS750IBS.html datasheet] linked to on the [[Hardware]] page for reference. From that datasheet, for the structure of the I2C register address u8: "Bit 0 is not used, bits 2:1 select the channel, bits 6:3 select one of the UART internal registers. Bit 7 is not used with the I2C-bus interface, but it is used by the SPI interface to indicate a read or a write operation."
== Device 14 ==
Used by [[Config_Services|Cfg]]-sysmodule via the i2c::EEP service. This is presumably EEPROM going by the service name.
The Cfg-module code which loads the [[Flash_Filesystem|CCAL]](nandro:/sys/{HWCAL0.dat/HWCAL1.dat}) file from NAND will load it from I2C instead, if a certain state flag is non-zero. Likewise for the function which writes CCAL to NAND. HMAC/hash verification after loading is skipped when the CCAL was loaded from I2C.
== Device 15 ==
== Device 15 ==